Produktbilder
På lager
Derfor vil du elske å handle hos OnBuy:
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (15,00 kr) | fre 4. - tor 10. des
Returer: 30 dager
180 dagers betalingsbeskyttelse
Sammendrag
When you first power , the LCD will have a white screen of about 2 seconds. This is because the program is designed in this way. The system will calculate some initial references needed for the subsequent measurement after power- for 2 seconds. In addition to the power being pressed, other switches in the white screen range are required to . If the is pressed, the subsequent measurement data will be inaccurate. Remember!
After 2 seconds of white screen, the LCD will display: F/C/L Tester, and then you can start to measure the parameters of the components you want.
For example, to measure the non-polar capacitance, connect the non-polar capacitance and then press the "test of non-polar capacitance". For example, to measure the inductance, connect the inductance and then press the "inductance test ". Only one of the five function switches can be pressed at the same . When testing what is pressed, the requirements that are not used will .
When testing nonpolar capacitors, inductors, and polar capacitors, these components are connected to the test stand regardless of polarity. For frequency testing, it is necessary to distinguish polarity. Note that.
If it is the first to use the purchased kit after welding, you need to adjust the brightness of the LCD. After 2 seconds of power , adjust the 10K potentiometer the top of the board to make the display effect of the 1602 reach a better state.
Specification: Item name: 51 Single-chip Microcomputer Inductance and Capacitance Frequency Meter DIY Electronic Kit
Working voltage: DC9V
Capacitance measurement range: 1pF - 1nF
Inductance measurement range: 1uH-100uH
Frequency measurement range: 0-50KHz
Note: It's diy kits. Need to solder by yourself.
There are differences in components between different batches, which
Detaljer
| OPC | PYC6Z9T |
|---|---|
| Koder | 4712521978848 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 3cm |
|---|---|
| Width | 10cm |
| Length | 19cm |
| Weight | 0.143kg |
| Colour | Multicolor |
| Material | PCB+components+acrylic |
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(152 anmeldelser) | - |
30 dager
Gratis retur Nei
|
233,58 kr
|
+15,00 kr Delivery
Estimert levering:
4-10 des
|
248,58 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser
Du får umiddelbar Cashback kun hos OnBuy! Skriv inn e-posten din nedenfor, så sender vi deg en kopi av handlekurven din slik at du sparer tid senere.
Ved å oppgi e-postadressen din blir du automatisk lagt til i databasen vår, hvor du kan få personlige Cashback-tilbud og tidlig tilgang til våre beste tilbud. Du kan når som helst melde deg av e-postene våre, og vi deler aldri opplysningene dine med andre. Les vår personvernerklæring og vilkår og betingelser for å finne ut mer.
Vil du ha tilgang til personlige tilbud og de beste Cashback-ratene? Meld deg på nyhetsbrevet vårt nedenfor.
Du kan når som helst velge å ikke motta e-post fra oss, og vi deler aldri opplysningene dine med andre. Les vår personvernerklæring og våre vilkår og betingelser for å finne ut mer.
Denne siden har utløpt.
Oppdater og fortsett