Audio Module Single 12V to 12V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 127,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (7,66 €) | pe 10. - to 16. heinä
Myyjä: CollBea
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa Auton subwooferit
Yhteenveto
- 1. With isolation function, the power board test conditions input DC12V, the ±12V output is about 13-14V without load,
- 2. The ±18V output is about 19V when no load is applied, and will decrease a bit after being loaded.
- 3. The power amplifier circuit has a certain voltage adaptability range, it doesn't matter how high or low it is, a few volts.
- 4. If installed in a car, the actual working voltage of the car is about 13.5V, and the output will be higher.
- 5. This board does not have a voltage stabilizing open-loop circuit, has small ripple, good transient response, high efficiency and low heat generation, and is suitable for power amplifiers.
Audio Module Single 12V to 12V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module Kuvaus
1. With isolation function, the power board test conditions input DC12V, the 12V output is about 13-14V without load,
2. The 18V output is about 19V when no load is applied, and will decrease a bit after being loaded.
3. The power amplifier circuit has a certain voltage adaptability range, it doesn't matter how high or low it is, a few volts.
4. If installed in a car, the actual working voltage of the car is about 13.5V, and the output will be higher.
5. This board does not have a voltage stabilizing open-loop circuit, has small ripple, good transient response, high efficiency and low heat generation, and is suitable for power amplifiers.
Description:
1.Output power: 200W
2. Input voltage: DC10-15V
3. Output current: 200W/output voltage = output current. That is, the higher the output voltage, the smaller the current.
Specifications: 12V output
Colour:As Shown
Material:PCB
Size:75x70x36mm
Package Contents:
1x Power Amplifier Module
1x 10A Fuse
Tiedot
| OPC | PRP9ZJ6 |
|---|---|
| Koodit | 4714060609009 (EAN) |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 8cm |
| Length | 9cm |
| Weight | 0.185kg |
| Colour | As Shown |
| Size | 12V |
| Material | PCB |
Vertaile myyjiä tuotteelle Audio Module Single 12V to 12V Subwoofer Car Audio Modification Amplifier Isolation Boost Dual Power Module
- Uusi alkaen 23,50 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(192 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
15,84 €
|
+7,66 € Delivery
Arvioitu toimitus:
10-16 heinä
|
23,50 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset