Debugger Emulator High Voltage Isolation Board for J-LINK, USB to SWD Debugger Adapter,MCU Programming Development Tool

Debugger Emulator High Voltage Isolation Board for J-LINK, USB to SWD Debugger Adapter,MCU Programming Development Tool Kuvaus

This product features a 510-ohm current-limiting resistor to protect the pins of the isolation chip, ensuring safe bidirectional signal transmission. It is designed for emulators with a DIO , where excessive internal series resistance may hinder communication. Most emulators with a 100-ohm resistor will operate effectively, making it a reliable choice for seamless connectivity.


No current-limiting resistors or pull-/pull-down resistors should be added to the DIO pins of the target board's microcontroller.

The ISO_SWD/COM isolation board is specifically designed for debugging high-voltage boards. It supports isolated SWD and serial communication for J-Link emulators, with a maximum isolation voltage of 1500 Vrms.

Parameters:
Output Level: Selectable (5V or 3.3V)
Maximum Isolation Voltage: 1500 Vrms
Maximum Output Current (5V/3.3V): 150 mA
Maximum SWD Speed: 6 MHz (Measured; Target MCU: GD32F103RCT6)
Download Interface: DIO (Data), CLK (Clock), RST (Reset)
Maximum Serial Port Baud Rate: 2 Mbps (Requires emulator support)
Serial Port Interface: TXD (Transmit), RXD (Receive)
Color: Black
Material: ABS

Package Contents:
1*Isolation Board
1*Dupont Cable