Tuotekuvat
DTH1 Temperature and Humidity Control Module Digital Display Dual-Output Automatic Constant Thermostat Board SHT3
Uusi
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 132,000 arvostelua arvosanalla “Erinomainen”
20,59 €
33,97 €
Alennus 39%!
+7,90 € Toimitus
1%
Mitä on välitön Cashback?
Lue lisää
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (7,90 €) | la 5. - pe 11. syys
Myyjä: FIbuy
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Suosittu
Kuvaus ja tiedot
Yhteenveto
- The temperature functions are as follows:1. Automatic recognition of working mode:The system automatically recognizes the working mode according to the start temperature/stop temperature;Start temperature Greater than stop temperature, cooling mode 'C'; start temperature Less than stop temperature, heating mode 'H';
- 2. Cooling mode:When the detected temperature is greater than or equal to the starting temperature, the relay is turned on, the red indicator light is on, and the refrigeration equipment starts to work;When the detected temperature is less than or equal to the stop temperature, the relay is turned off, the red indicator light is off, and the refrigeration equipment stops working;
- 3. Heating mode:When the detected temperature is less than or equal to the starting temperature, the relay is turned on, the red indicator light is on, and the heating equipment starts to work;When the detected temperature ≥ the stop temperature, the relay is turned off, the red indicator light is off, and the heating equipment stops working
- 4. Temperature correction function OFE (-10.0℃ - 10.0℃):When the system works for a long time, there may be deviations, which can be corrected by this function, the actual temperature = measured temperature + calibration value;
- Constant Thermostat Board SHT3
DTH1 Temperature and Humidity Control Module Digital Display Dual-Output Automatic Constant Thermostat Board SHT3 Kuvaus
The temperature functions are as follows:1. Automatic recognition of working mode:The system automatically recognizes the working mode according to the start temperature/stop temperature;Start temperature Greater than stop temperature, cooling mode 'C'; start temperature Less than stop temperature, heating mode 'H';
2. Cooling mode:When the detected temperature is greater than or equal to the starting temperature, the relay is turned , the red indicator light is , and the refrigeration equipment starts to work;When the detected temperature is less than or equal to the stop temperature, the relay is turned off, the red indicator light is off, and the refrigeration equipment stops working;
3. Heating mode:When the detected temperature is less than or equal to the starting temperature, the relay is turned , the red indicator light is , and the heating equipment starts to work;When the detected temperature the stop temperature, the relay is turned off, the red indicator light is off, and the heating equipment stops working
4. Temperature correction function OFE (-10.0 - 10.0):When the system works for a long , there may be deviations, which can be corrected by this function, the actual temperature = measured temperature + calibration value;
The humidity functions are as follows:1. Automatic recognition of working mode:The system automatically recognizes the working mode according to the start humidity/stop temperature;
Start humidity Greater than stop humidity, dehumidification mode 'd'; start humidity Less than stop humidity, humidify mode 'E';
2. Dehumidification mode:When the detected humidity is greater than or equal to the starting humidity, the relay is turned , the green indicator light is , and the dehumidification equipment starts to work;
When the detected humidity stop humidity, the relay is turned
Tiedot
| OPC | PXR6D7T |
|---|---|
| Koodit | 4711515027289 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 5cm |
|---|---|
| Width | 8cm |
| Length | 15cm |
| Weight | 0.15kg |
| Colour | As Shown |
| Material | Plastic |
Vertaile myyjiä tuotteelle DTH1 Temperature and Humidity Control Module Digital Display Dual-Output Automatic Constant Thermostat Board SHT3
- Uusi alkaen 28,49 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(192 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
20,59 €
|
+7,90 € Delivery
Arvioitu toimitus:
5-11 syys
|
28,49 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset