ESP32 NRF24L01 2.4GHz Tester Adapter Board,Wi-Fi and Development Board Compatible?with Wireless Module Testing,Prototyping
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 139,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (10,33 €) | ti 1. - ma 7. joulu
Palautukset: 30 päivää
180 päivän maksuturva
Saattaisit pitää myös näistä
Yhteenveto
- Instructions: Connect the Type-C port to a 5V power supply and toggle the switch on the adapter board from OFF to ON; simultaneously press the RST (reset) button on the ESP32 development board to put the device into operation.
- Special Note:
- 1. Before purchasing this adapter board, please measure the pin width of your own ESP32 development board to see if it is a standard original development board with a pin distance of 25.4mm. If it is not this size, please do not purchase it;
- 2. Please check if your own ESP32 development board is the original ESP32 DevKitC V4 38Pin development board; If it is not a 38Pin pin, please do not purchase, thank you!
- 3. This is an adapter board only; it does not include any development board.
ESP32 NRF24L01 2.4GHz Tester Adapter Board,Wi-Fi and Development Board Compatible?with Wireless Module Testing,Prototyping Kuvaus
Instructions: Connect the Type-C port to a 5V power supply and toggle the the adapter board from OFF to ; simultaneously press the RST (reset) button the ESP32 development board to put the device into operation.
Special Note:
1. Before purchasing this adapter board, please measure the pin width of your own ESP32 development board to see if it is a standard original development board with a pin distance of 25.4mm. If it is not this size, please do not purchase it;
2. Please check if your own ESP32 development board is the original ESP32 DevKitC V4 38Pin development board; If it is not a 38Pin pin, please do not purchase, thank you!
3. This is an adapter board only; it does not include any development board.
Color: As Shown
Material: PCB
Package Contents:
2 * ESP32 DevKitC Dev Board
Tiedot
| OPC | PYWNR7R |
|---|---|
| Koodit | 4711786162658 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 4cm |
|---|---|
| Width | 8cm |
| Length | 17cm |
| Weight | 0.11kg |
| Colour | As Shown |
| Material | PCB |
Vertaile myyjiä tuotteelle ESP32 NRF24L01 2.4GHz Tester Adapter Board,Wi-Fi and Development Board Compatible?with Wireless Module Testing,Prototyping
- Uusi alkaen 111,03 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(152 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
100,70 €
|
+10,33 € Delivery
Arvioitu toimitus:
1-7 joulu
|
111,03 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset



