Tuotekuvat
Sorry, this item is temporarily out of stock.
RFID Car Alarm System Push Engine Start Stop Button Lock Ignition Immobilizer with Remote Keyless Go Entry System 12V
Brändi Melitt
New
27,06 €
Samankaltaiset tuotteet, joista uskomme sinun pitävän
Would you like us to let you know when it's back?
Kuvaus ja tiedot
Yhteenveto
- Operating Instructions: Into the anti-theft: 15 seconds after each turn off the host tweet 1, said the system has entered the anti-theft state, then start the button lights turn off, the whole car power, start operation is invalid..Exit the anti-theft: When the ID sensor card near the car in the induction coil area, this time the host tweeted 2, said the system has been revoked anti-theft, start button immediately power flash, the vehicle can start at any time.
- A key to start: foot brakes, short press start button 1 times after the release, that is, the vehicle automatically activated after 0.5 seconds.A key off: foot brakes, short press the start button 1 times after the release, that is, the vehicle immediately turn off.A key to open the sound: do not step on the foot brake, short press a key to start the button to open the sound, the function as the key hit the first file.
- A key to open the instrument panel: do not step on the foot brake, has been opened on the basis of sound and then press a key to start the button to open the instrument panel, then the instrument panel power, function as the key hit in the second file.
- Parameters: Operating voltage: DC voltage DC = 12V, no support 24V power supply.Standby current: 8mA (Note: continuous standby up to a month).Button display: blue light (Note: in the flame-resistant state of the blue light off, anti-theft after the anti-flash)Into the anti-theft: each time off the fire 15 seconds the system automatically locks the engine, the whole car off, the button lights off.
- Exit the anti-theft: on the train using the ID card proximity sensor coil, the host tweeted 2 out of the anti-theft.Brake light output flashing voltage: DC = 12V (Note: the output time controlled by the foot brake).Brake light output form: each brakes after the first brake light flashing 4, and then long bright, loose feet off..Alarm: brake light alarm, when the car on the illegal brakes, the brake light will flash alarm for 15 seconds.
RFID Car Alarm System Push Engine Start Stop Button Lock Ignition Immobilizer with Remote Keyless Go Entry System 12V Kuvaus
Operating Instructions: Into the anti-theft: 15 seconds after each turn off the host tweet 1, said the system has entered the anti-theft state, then start the button lights turn off, the whole car power, start operation is invalid..Exit the anti-theft: When the ID sensor card near the car in the induction coil area, this the host tweeted 2, said the system has been revoked anti-theft, start button immediately power flash, the vehicle can start at any .
A key to start: foot brakes, short press start button 1 times after the release, that is, the vehicle automatically activated after 0.5 seconds.A key off: foot brakes, short press the start button 1 times after the release, that is, the vehicle immediately turn off.A key to open the sound: do not step the foot brake, short press a key to start the button to open the sound, the function as the key hit the first file.
A key to open the instrument panel: do not step the foot brake, has been opened the basis of sound and then press a key to start the button to open the instrument panel, then the instrument panel power, function as the key hit in the second file.
Parameters: Operating voltage: voltage = 12V, no support 24V power supply.Standby current: 8mA (Note: continuous standby to a month).Button display: light (Note: in the flame-resistant state of the light off, anti-theft after the anti-flash)Into the anti-theft: each off the fire 15 seconds the system automatically locks the engine, the whole car off, the button lights off.
Exit the anti-theft: the train using the ID card proximity sensor coil, the host tweeted 2 out of the anti-theft.Brake light output flashing voltage: = 12V (Note: the output controlled by the foot brake).Brake light output form: each brakes after the first brake light flashing 4, and then long bright, loose feet off..Alarm: brake light alarm, when the car the illegal brakes, the brake light will flash alarm for 15 second
Tiedot
| OPC | PSRDSF2 |
|---|---|
| Brändi | Melitt |
| Koodit | 6032089428370 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 6cm |
|---|---|
| Width | 15cm |
| Length | 18cm |
| Weight | 0.335kg |
| Colour | black |
| Material | ABS |