S402B 2 Points PE Pipe Water Flow Sensor Hall Flowmeter G 1/4" Fast Connection Interface,Water Dispenser Flow Meter
Varastossa
Miksi tulet rakastamaan ostoksia OnBuyssa:
- Ansaitse Cashback jokaisesta ostoksesta – käytä se heti seuraavaan tilaukseesi
- Ilmainen toimitus – miljooniin tuotteisiin sivustolla
- Asiakkaat rakastavat meitä – 128,000 arvostelua arvosanalla “Erinomainen”
OnBuyn myymien tuotteiden hinnat sisältävät ALV:n.
Korottomat maksuvaihtoehdot saatavilla
Katso koko tuotekuvaus ja tiedot
Toimitus: Vakio (3,50 €) | pe 17. - ke 22. heinä
Myyjä: Kulemip
Palautukset: 30 päivää
180 päivän maksuturva
Suosituimmat tuotteet kategoriassa Ompelusarjat ja -sarjat
Yhteenveto
- Made of high quality ABS and metal material, it is solid, durable and good performances, serve you for a long-term. 0.5-6L/minutes, high efficiency, stable performances. G 1/4" fast connection interfaces, easy to install. Suitable for water dispenser, water heater and so on.
- Product Parameters:Start water flows: Less than 0.20L/minutes;Starting water pressure: Less than 0.1Mpa;Working flows range: 0.5-6L/minutes;
- Pay attention to clean the air impellers on the residual water when the output signal is not highers than 150HZ, idle for time should be 30 seconds.
- Bearing water pressure: up to 0.8Mpa;Operating voltage range: 3.5-12VDC;Operating current: 0.51.5MA;Working environment temperature: 1-100;Applicable environment temperature: -40-100;Output characteristic: (32xQ)Q for traffic L/minutes, Hz (Hz); Error ±3% Service life: 106H;
- Electrical strength: Over 600VAC, Durations of 5S leakage current 3mA Insulation resistance: Over 100mΩ, The insulation resistance between the connector and the housing body or the valves body.
S402B 2 Points PE Pipe Water Flow Sensor Hall Flowmeter G 1/4" Fast Connection Interface,Water Dispenser Flow Meter Kuvaus
Made of high quality ABS and metal material, it is solid, durable and good performances, serve you for a long-term. 0.5-6L/minutes, high efficiency, stable performances. G 1/4" fast connection interfaces, easy to install. Suitable for water dispenser, water heater and so .
Product Parameters:Start water flows: Less than 0.20L/minutes;Starting water pressure: Less than 0.1Mpa;Working flows range: 0.5-6L/minutes;
Pay attention to clean the air impellers the residual water when the output signal is not highers than 150HZ, idle for should be 30 seconds.
Bearing water pressure: to 0.8Mpa;Operating voltage range: 3.5-12VDC;Operating current: 0.51.5MA;Working environment temperature: 1-100;Applicable environment temperature: -40-100;Output characteristic: (32xQ)Q for traffic L/minutes, Hz (Hz); Error 3% Service life: 106H;
Electrical strength: Over 600VAC, Durations of 5S leakage current 3mA Insulation resistance: Over 100mΩ, The insulation resistance between the connector and the housing body or the valves body.
Color: White
Material: plastic
Package Contents:
1*S402B Water Flow Sensor
Tiedot
| OPC | PVBZJ9M |
|---|---|
| Brändi | Semoic |
| Koodit | 6031342780569 (EAN) |
| Tuote- ja turvallisuustiedot |
Tuotetiedot
| Height | 3cm |
|---|---|
| Width | 5cm |
| Length | 9cm |
| Weight | 0.037kg |
| Colour | White |
| Material | Plastic |
Vertaile myyjiä tuotteelle S402B 2 Points PE Pipe Water Flow Sensor Hall Flowmeter G 1/4" Fast Connection Interface,Water Dispenser Flow Meter
- Uusi alkaen 20,79 €
| Myyjä | Arviot | Takuu | Palautukset | Hinta | Toimitus | Yhteensä | Määrä |
|---|---|---|---|---|---|---|---|
|
Lähetetty varastolta:
|
(127 arvostelua) | - |
30 päivää
Ilmaiset palautukset Ei
|
17,29 €
|
+3,50 € Delivery
Arvioitu toimitus:
17-22 heinä
|
20,79 €
|
Ansaitse ostamalla – saat välittömän Cashback-hyvityksen kaikesta.
Ei koukkuja, ei kuluja
- Maksetaan OnBuy-tilillesi
- Käytä se seuraavaan ostokseesi
- Säästä se tai nosta se
Ryhdy Cashback VIP -jäseneksi
Vain yksi ostos avaa suuremmat tarjoukset ja paremmat alennukset