SPX-17873 Power Meter ACS37800 Current Power Monitoring Sensor

SPX-17873 Power Meter ACS37800 Current Power Monitoring Sensor Kuvaus

The ACS37800 is a power sensor capable of sensing voltages to 60VDC and currents to 30A. It greatly simplifies the process of adding power monitoring to many power supply systems and is ideal for high-current applications such as: monitoring 3D printer power consumption, monitoring drone battery charge, battery charging/regulation, and solar/PV panel power monitoring.
for Allegro's Hall effect-based current isolation sensing technology achieves enhanced isolation ratings within a small PCB footprint. These features enable isolated current sensing without the power losses of expensive Rogowski coils, ultra-high current , isolation operational amplifiers, or shunt resistors.
The ACS37800 power monitoring IC provides key power measurement parameters that are easily accessible through its digital interface. Dedicated and configurable I/O pins are provided for voltage/current zero-crossing, undervoltage and overvoltage reporting, and fast overcurrent fault detection. User configuration of the IC is available via -chip EEPROM.
Our for library makes adding the ACS37800 to your projects simple. We have also written a configuration example that you can use to inspect and change all the settings of the ACS37800 through the 1DE serial monitor or terminal emulator.

0.85 mQ primary conductor resistance for Iow power loss Compatible with floating and non-floating GND
1 kHz bandwidth Current sensing range to +/-30 A
Default I2C address: 0x60
I2C address can be changed and stored in EEPROM Voltage channel RMS noise: +/-0. 3mV Current channel RMS noise: +/-0.1A
Voltage channel total output error: +/-1% (-40 to 125)
Current channel total output error: +/-2% (25 to 125)
Current channel total output error: +/-2.7% (-40 to 25 )
Two 0.25inch (6mm) through-holes for high current connections