0.4x2M Water Transfer Printing Film Hydrographics Dipping Decor Kit Snakeskin

0.4x2M Water Transfer Printing Film Hydrographics Dipping Decor Kit Snakeskin Περιγραφή

Application range: can be applied to the surface of the materails such as hardware(brass,iron,aluminum,copper,etc.),wood,plastic(ABS,PU,PP,PE,PVC,etc.),stone,ceramic,glass,etc.
Applicable industries: autos, electronic products,household appliance,daily arts and crafts,indoor,footwear,sports apparatus,etc.
Tensile properties, pattern is not easy deformation.
Environment friendly , it will not bring pollution to the natural environment.
Not easy to fade; waterproof ; enduring aesthetic appearance.

Water transfer film , also called cubic transfer printing, is a way to do the printing the surface that is irregular, which overcomes the problem facing offset printing that can not reach the tongued and grooved face.
Specification:
colour:black
Water Operation Temperature: 25-35 Celsius
Thickness: 0.03mm
Size: 40 x 200cm
Pattern:Snakeskin
Material:PVA
How To Use:
Base coating: Mix well the paint obtaining the color that you need.
Film selections: Select printing film that you need.
Place film: Cut out the fit size, place it flatly water surface.
Activation: Spray the activator uniformly the film after placing the film the water 60-90 seconds.
Transfer: Keep 35 degrees, with a fixture alignment film paper uniform downward pressure.
Soaking: About 30 seconds.
Washing: Remove the remaining film.
Drying: Remove the product' surface water.
Storage :
The film should be covered by plastic when store. A heavy / dark trash bag is perfect.
Film Storage: 18-25 Celsius
Optimum Temperature: 21.5 Celsius
Humidity: 45-65%
Do not open until ready to use to prevent contact with the air. Water Transfer Printing Film is a Hygroscopic Substance. It has the ability of attracting and holding water molecules from the surrounding environment... Do not store near water or in the room where your dip tank is located.
Avoid direct sunlight.