1set Automatic Irrigation DIY Kit Watering System Capacitive Soil Moisture Sensor and Water Pump for Garden Watering DIY

1set Automatic Irrigation DIY Kit Watering System Capacitive Soil Moisture Sensor and Water Pump for Garden Watering DIY Περιγραφή

Comprehensive Automatic Irrigation Solution: Equipped with a pump, vinyl tubing, and advanced sensors, this DIY kit autonomously waters your plants by accurately monitoring soil moisture levels.
High Sensitivity Capacitive Sensor: Features an operating voltage range of 3.3 - 5.5V and an analog output of 0 - 3.0V . With a simple PH2.54-3P interface, it guarantees precise moisture detection to ensure optimal watering for your plants and flowers.
Reliable 1 Channel 5V Relay Module: Capable of handling maximum loads to AC 250V/10A or 30V/10A. It includes a green power indicator and a red relay status indicator, ensuring operational clarity and safety in managing power flow.
Efficient Water Pump: This submersible pump operates 3V or 4.5V with a no-load water discharge capacity of 100L/H. Its low load rated current of 0.18A makes it perfect for aquariums, fish tanks, and hydroponic systems, providing dependable and quiet operation.
Versatile Usage and Easy Installation: The submersible pump is suitable for small-sized aquariums, tabletop fountains, water gardens, and hydroponic setups.

Capacitive Soil Moisture Sensor:
Operating voltage:3.3 - 5.5 VDC
Output voltage:0 - 3.0 VDC
Interface:PH2.54-3P
Pin:Analog signal output, GND, VCC
1 Channel 5V Relay Module:
VCC:Connect 5V Positive Pole Power Supply
GND:Connect 5V Negative Pole Power Supply
Water Pump:
Voltage:3-5 V
Outside diameter of water outlet:0.29inch/7.5mm
Inside diameter of water outlet:0.17inch/4.5mm
Water inlet diameter:0.19inch/5mm
Driving mode: brushless design, magnetic driving
Continuous working life of 300 hours
Note:Due to different production batches, there are differences in appearance, which does not affect usage.
Colour:As Shown
Material:Plastic+Electronic Com