3500W Stainless Steel Electric Immersion Water Heater 220V Automatic Type
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 137,000 κριτικές με βαθμολογία « Άριστα »
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Κανονικό (5,00 €) | Πεμ 12 - Τρι 17 Νοε
Πωλείται από: FENGHH
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Μπορεί επίσης να σου αρέσουν
3500W Stainless Steel Electric Immersion Water Heater 220V Automatic Type Περιγραφή
3500w Electric Water Heater Stainless Steel Automatic Immersion Heater 220v
Put the heater into plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, barrels, buckets and other containers filled with water. Ensure the water level allows the heater to be suspended in the water. Insert the heater when the water level is above 25 to 30 cm. The product will automatically float on the surface. Adjust the power cord to place the heater suspended in the proper position. If the water level of the container is less than 25 cm, the product cannot be suspended in the water. Ensure the heating pipe is fully submerged in water, and the heater can be used with a slight tilt. If using the heater in inflatable swimming pools, bathtubs or containers made of other materials, place a ceramic under the heat pipe to avoid direct contact between the heat pipe and the container. After putting the heater into the water-filled container, plug in the power. Wait until the heater indicator light turns on, and many small bubbles appear around the heat pipe, then the heater starts to heat. If the water volume is large, unplug the plug halfway through heating to test the water temperature. When the water temperature reaches the required temperature, unplug the plug first, wait 20 seconds before taking out the heater, then the water is ready for use.
Specifications:
Type: Electric Water Heater Parts
Model Number: Electric Water Heaters
Power: 3500W
Cable Length: 1.5m
Voltage: 220V 50HZ
Material: Stainless Steel + PP Plastic
This immersion heater is compatible with bathtubs, buckets, inflatable swimming pools etc.
When using the product, the metal heating tube must be completely in water. Do not use the water during heating. Unplug the plug before contacting the water. Do not contact the water when the product is heating. Unplug the plug before using the water. The stainless steel ball part must be fully submerged in water during heating, otherwise it will be damaged.
Package Included:
1 X Heater
The adapter will be delivered compatible with your country.
Λεπτομέρειες
| OPC | PYDBR6N |
|---|---|
| Κωδικοί | 9199882550657 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Σύγκρινε Πωλητές για 3500W Stainless Steel Electric Immersion Water Heater 220V Automatic Type
- Νέο από 56,99 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(19 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
51,99 €
|
+5,00 € Delivery
Εκτ. Παράδοση:
12-17 Νοε
|
56,99 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά