3D Printer Motherboard Silent Driver TMC2209 V3.0 Super Silent Stepper Motor Driver
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 131,000 κριτικές με βαθμολογία « Άριστα »
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Κανονικό (8,54 €) | Τρι 25 - Δευ 31 Αυγ
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Περίληψη
- Hardware compatible with for StepStick and for Pololu A4988
- Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
- Step/Dir interface with microstep interpolation (up to 256 microsteps)
- Configuration via CFG pins or UART interface
- Motor voltage: 5.5...28V
3D Printer Motherboard Silent Driver TMC2209 V3.0 Super Silent Stepper Motor Driver Περιγραφή
Hardware compatible with for StepStick and for Pololu A4988
Drive capability to 1.7A (RMS) continuous coil current - 2.8A
Step/Dir interface with microstep interpolation ( to 256 microsteps)
Configuration via CFG pins or UART interface
Motor voltage: 5.5...28V
Logic voltage: 3.3...5V
RSense: 0.11 Ohm
stealthChop2 - for quiet operation and smooth motion
spreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
coolStep - current control for savings
The TMC2209 is an ultra-quiet motor driver IC ( imported chip) for two-phase stepper motors. The TMC2209 is pin-compatible with many legacy drivers as well as the TMC2208. advanced StealthChop2 chopper ensures silent motor operation, high efficiency, and maximum torque. Its combination of fast current regulation and resonance suppression enables highly dynamic motion. StallGuard prevents stalls by providing sensorless homing. Built-in power MOSFETs handle motor currents to 2A RMS and feature protection and diagnostic features for stable and reliable operation. An easy-to-use UART interface opens tuning and control options. Application tuning can be stored in OTP memory. Separate pulse directions allow the drive to be configured for silent operation and very precise operation, resulting in a cost-effective and competitive solution.
Color: As Shown
Material: plastic
Package Contents:
1 * Driver
1 * Heat sink
1 * Screwdriver
1 * Ribbon cable
Λεπτομέρειες
| OPC | PW79XQY |
|---|---|
| Κωδικοί | 4713901418725 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Στοιχεία Προϊόντος
| Height | 3cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.011kg |
| Colour | As Shown |
| Material | Plastic |
Σύγκρινε Πωλητές για 3D Printer Motherboard Silent Driver TMC2209 V3.0 Super Silent Stepper Motor Driver
- Νέο από 15,78 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(133 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
7,24 €
|
+8,54 € Delivery
Εκτ. Παράδοση:
25-31 Αυγ
|
15,78 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά