3D Printer Motherboard Silent Driver TMC2209 V3.0 Super Silent Stepper Motor Driver
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 133,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (2 999,11 Ft) | kedd 15. - hét 21. szept.
Visszaküldés: 30 nap
180 napos fizetési védelem
Ez is érdekelhet
Összefoglaló
- Hardware compatible with for StepStick and for Pololu A4988
- Drive capability up to 1.7A (RMS) continuous coil current - 2.8A Peak
- Step/Dir interface with microstep interpolation (up to 256 microsteps)
- Configuration via CFG pins or UART interface
- Motor voltage: 5.5...28V
3D Printer Motherboard Silent Driver TMC2209 V3.0 Super Silent Stepper Motor Driver leírása
Hardware compatible with for StepStick and for Pololu A4988
Drive capability to 1.7A (RMS) continuous coil current - 2.8A
Step/Dir interface with microstep interpolation ( to 256 microsteps)
Configuration via CFG pins or UART interface
Motor voltage: 5.5...28V
Logic voltage: 3.3...5V
RSense: 0.11 Ohm
stealthChop2 - for quiet operation and smooth motion
spreadCycle - highly dynamic motor control chopper (enableable via UART, OTP, CFG Pin)
coolStep - current control for savings
The TMC2209 is an ultra-quiet motor driver IC ( imported chip) for two-phase stepper motors. The TMC2209 is pin-compatible with many legacy drivers as well as the TMC2208. advanced StealthChop2 chopper ensures silent motor operation, high efficiency, and maximum torque. Its combination of fast current regulation and resonance suppression enables highly dynamic motion. StallGuard prevents stalls by providing sensorless homing. Built-in power MOSFETs handle motor currents to 2A RMS and feature protection and diagnostic features for stable and reliable operation. An easy-to-use UART interface opens tuning and control options. Application tuning can be stored in OTP memory. Separate pulse directions allow the drive to be configured for silent operation and very precise operation, resulting in a cost-effective and competitive solution.
Color: As Shown
Material: plastic
Package Contents:
1 * Driver
1 * Heat sink
1 * Screwdriver
1 * Ribbon cable
Részletek
| OPC | PW79XQY |
|---|---|
| Kódok | 4713901418725 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 3cm |
|---|---|
| Width | 6cm |
| Length | 10cm |
| Weight | 0.011kg |
| Colour | As Shown |
| Material | Plastic |
Eladók összehasonlítása: 3D Printer Motherboard Silent Driver TMC2209 V3.0 Super Silent Stepper Motor Driver
- Új innen 6 995,60 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(133 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
3 996,49 Ft
|
+2 999,11 Ft Delivery
Várható szállítás:
15-21 szept.
|
6 995,60 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el