5PCS Screen Protector for Mono 2, 3D Printer Screen Protector Film for Mono 2 6.6Inch 4K Resin 3D Printer
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 129,000 κριτικές με βαθμολογία « Άριστα »
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Κανονικό (9,30 €) | Δευ 3 - Σαβ 8 Αυγ
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Περίληψη
- Screen protector: The screen protector can prevent the resin pollution screen when the FEP is damaged, extend the use time of the LCD screen, and save the cost of replacing the screen.
- The light transmission rate exceeds 95%: The light transmission rate of the screen protective film is above 95%, which will not affect the ultraviolet rays of the 405nm wavelength through the protective film and solidify the resin, which can maintain the printing accuracy of the 3D printer.
- High -quality screen protector: The screen protector is made of high -quality PET materials imported from Japan. The double -mask ensures that it will not be scratched before use, and the edge of the edge will not produce white edges after paste. Therefore, it will not affect the printing amount after installation, just level it.
- You can refer to the installation steps in the picture for operation, and use a spatula to avoid air bubbles during installation.
- Compatible model: Screen protector is for Anycubic Photon Mono 2 LCD Resin 3D printer.
5PCS Screen Protector for Mono 2, 3D Printer Screen Protector Film for Mono 2 6.6Inch 4K Resin 3D Printer Περιγραφή
Screen protector: The screen protector can prevent the resin pollution screen when the FEP is damaged, extend the use of the LCD screen, and save the cost of replacing the screen.
The light transmission rate exceeds 95%: The light transmission rate of the screen protective film is above 95%, which will not affect the ultraviolet rays of the 405nm wavelength through the protective film and solidify the resin, which can maintain the printing accuracy of the 3D printer.
High -quality screen protector: The screen protector is made of high -quality PET materials imported from Japan. The double -mask ensures that it will not be scratched before use, and the of the will not produce white edges after paste. Therefore, it will not affect the printing amount after installation, just level it.
You can refer to the installation steps in the picture for operation, and use a spatula to avoid air bubbles during installation.
Compatible model: Screen protector is for Photon Mono 2 LCD Resin 3D printer.
Material: PET
colour: transparent
Package Contents:
5 x Screen Protector
Λεπτομέρειες
| OPC | PWF7MVB |
|---|---|
| Κωδικοί | 6033087636941 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Στοιχεία Προϊόντος
| Height | 1cm |
|---|---|
| Width | 16cm |
| Length | 23cm |
| Weight | 0.0755kg |
| Colour | Transparent |
| Material | PET |
Σύγκρινε Πωλητές για 5PCS Screen Protector for Mono 2, 3D Printer Screen Protector Film for Mono 2 6.6Inch 4K Resin 3D Printer
- Νέο από 19,82 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(88 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
10,52 €
|
+9,30 € Delivery
Εκτ. Παράδοση:
3-8 Αυγ
|
19,82 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά