pH and Chlorine Controller Sensor Probe for Accurate and Reliable Water Testing and Pool Maintenance
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 139,000 κριτικές με βαθμολογία « Άριστα »
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Κανονικό (2,00 €) | Πεμ 3 - Τρι 8 Δεκ
Πωλείται από: ALICJAANNAP
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
pH and Chlorine Controller Sensor Probe for Accurate and Reliable Water Testing and Pool Maintenance Περιγραφή
Working Environment
1. Ambient temperature: 5 to 40C.
2. Ambient relative humidity: 85%.
Use, Maintenance and Precautions
1. Before testing, remove the protective cover from the electrode. The solution inside the cover is 3 M KCl. If crystals appear, this is normal and does not affect electrode performance.
2. Check that the sensitive glass bulb is completely filled with liquid. If bubbles are present, gently shake the electrode like a thermometer to move the bubbles out of the sensitive bulb; otherwise, test accuracy may be affected.
Electrode and pH Meter Calibration and Testing
1. Connect the pH electrode to the input terminal of the pH instrument and ensure that the connection is secure and correct.
2. Calibrate the electrode according to the instrument's operating instructions. The calibration result should then be measured.
Storage and Maintenance of the Liquid-Filled Combination pH Electrode
1. The electrode uses a liquid-filled structure. Clean it with distilled water and place it in the protective bottle. Before the next test, activate it by replenishing the solution.
2. If the electrode will not be used for an extended period, rinse it and remove any remaining distilled water.
3. Do not allow the sensitive glass bulb at the front of the electrode to contact hard objects. Damage or scratches may cause the electrode to become unusable.
4. After prolonged use, the electrode's slope and response speed may decrease. To restore performance, immerse the measuring end in 4% hydrofluoric acid for 3 to 5 seconds or in a diluted hydrochloric acid solution for 1 to 2 minutes. Then rinse it with distilled water and soak it in 4 M potassium chloride solution.
5. If the tested container contains substances that can easily contaminate the sensitive bulb or block the liquid junction, the electrode may become passivated. This can significantly slow the response, reduce the slope, or cause unstable readings. Select a suitable cleaning solution according to the type of contaminant to restore the electrode.
Specifications
Heating voltage: 5 0.2 V AC/DC
Operating current: 5 to 10 mA
Detectable concentration range: pH 0 to 14
Detection temperature range: 0 to 80C
Response time: 5 seconds
Settling time: 60 seconds
Component power: 0.5 W
Operating temperature: -10 to 50C; rated temperature: 20C
Humidity: 95% relative humidity; rated humidity: 65% relative humidity
Module dimensions: 42 mm 32 mm 20 mm
Output: analogue voltage signal output
Mounting: four M3 mounting holes
Λεπτομέρειες
| OPC | PYV85XS |
|---|---|
| Κωδικοί | 9376349469848 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Customers also buy
Σύγκρινε Πωλητές για pH and Chlorine Controller Sensor Probe for Accurate and Reliable Water Testing and Pool Maintenance
- Νέο από 45,99 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(16 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
43,99 €
|
+2,00 € Delivery
Εκτ. Παράδοση:
3-8 Δεκ
|
45,99 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά