StackChan Core for StackChan Robot ESP32-S3 16MB Flash 8MB PSRAM Wi-Fi+BLE with 2inch Touchscreen for StackChan Repair
Σε απόθεμα
Γιατί θα λατρέψεις τις αγορές στην OnBuy :
- Κέρδισε Επιστροφή Ποσού σε κάθε αγορά – ξόδεψε το άμεσα στην επόμενη παραγγελία σου
- Δωρεάν παράδοση – σε εκατομμύρια προϊόντα σε όλο το site
- Οι πελάτες μας λατρεύουν – 129,000 κριτικές με βαθμολογία « Άριστα »
Οι τιμές για τα είδη που πωλούνται από την OnBuy περιλαμβάνουν ΦΠΑ.
Διαθέσιμες άτοκες επιλογές πληρωμής
Δες την πλήρη περιγραφή & λεπτομέρειες του προϊόντος
Παράδοση: Κανονικό (4,00 €) | Τρι 4 - Δευ 10 Αυγ
Πωλείται από: το καλύτερο
Επιστροφές: 30 ημέρες
Προστασία πληρωμής 180 ημερών
Τα πιο δημοφιλή στο Μητρικές κάρτες
Περίληψη
- For StackChan main controller repair and replacement
- Based on the ESP32; supports Wi-Fi; features 16MB Flash and 8MB PSRAM
- Includes built-in camera, proximity sensor, speaker, power indicator, RTC, I2S power amplifier, dual microphones, capacitive touchscreen, power button, reset button, and gyroscope
- Supports OTG and CDC functions
- Utilizes AXP2101 power management; features a low-power design
StackChan Core for StackChan Robot ESP32-S3 16MB Flash 8MB PSRAM Wi-Fi+BLE with 2inch Touchscreen for StackChan Repair Περιγραφή
For StackChan main controller repair and replacement
Based the ESP32; supports Wi-Fi; features 16MB Flash and 8MB PSRAM
Includes built-in camera, proximity sensor, speaker, power indicator, RTC, I2S power amplifier, dual microphones, capacitive touchscreen, power button, reset button, and gyroscope
Supports OTG and CDC functions
Utilizes AXP2101 power management; features a low-power design
Specifications:
The StackChan Core serves as the central controller for the StackChan robot and is suitable as a replacement unit for the main controller. Powered by an ESP32-S3 chip featuring a 240 MHz dual-core processor, it includes 16MB of Flash and 8MB of PSRAM, with native support for Wi-Fi and BLE wireless communication. The device integrates a wide range of peripherals: a 2.0-inch capacitive touchscreen with high-strength glass and a 0.3 MP camera, along with proximity, ambient light, and 9-axis attitude sensors. It also features a microSD card slot, a built-in 1W speaker, dual microphones, and physical power and reset buttons. Designed to replace the original main unit, it is fully compatible with the StackChan AI desktop robot.
SoC: ESP32-S3 (Dual-core Xtensa LX7 processor, 240 MHz)
Flash: 16 MB
PSRAM: 8 MB Quad
Wi-Fi: 2.4 GHz Wi-Fi
Touch IPS LCD: 2.0" @ 320 x 240 (ILI9342C)
Camera: GC0308 @ 0.3 MP
Proximity Sensor: LTR-553ALS-WA
PMIC: AXP2101
6-axis Motion Sensor: BMI270
3-axis Magnetometer: BMM150
RTC: BM8563
Speaker: 16-bit I2S with AW88298 amplifier (1 W)
Audio Codec: ES7210 (dual-microphone input)
Note:The StackChan Core comes pre-installed with the StackChan firmware.
Color: As Shown
Material: Glass+ABS
Package Contents:
1 x StackChan Core
1 x L-shaped hex key, 1.5mm (for M2 screws)
1 x L-shaped hex key, 2.5mm (for M3
Λεπτομέρειες
| OPC | PWXPGFG |
|---|---|
| Κωδικοί | 6032016861379 (EAN) |
| Πληροφορίες προϊόντος και ασφάλειας |
Στοιχεία Προϊόντος
| Height | 2cm |
|---|---|
| Width | 10cm |
| Length | 15cm |
| Weight | 0.06kg |
| Colour | As Shown |
| Material | Glass+ABS |
Σύγκρινε Πωλητές για StackChan Core for StackChan Robot ESP32-S3 16MB Flash 8MB PSRAM Wi-Fi+BLE with 2inch Touchscreen for StackChan Repair
- Νέο από 103,89 €
| Πωλητής | Αξιολογήσεις | Εγγύηση | Επιστροφές | Τιμή | Παράδοση | Σύνολο | Ποσότητα |
|---|---|---|---|---|---|---|---|
|
Αποστολή από:
|
(282 αξιολογήσεις) | - |
30 ημέρες
Δωρεάν επιστροφές Όχι
|
99,89 €
|
+4,00 € Delivery
Εκτ. Παράδοση:
4-10 Αυγ
|
103,89 €
|
Κέρδισε καθώς ψωνίζεις με άμεσο Cashback σε όλα.
Χωρίς παγίδες, χωρίς κόστος
- Καταβάλλεται στον λογαριασμό σας στο OnBuy
- Ξόδεψέ το στην επόμενη αγορά σου
- Αποθήκευσέ τα ή κάνε ανάληψη
Γίνετε Cashback VIP
Μόνο 1 αγορά ξεκλειδώνει μεγαλύτερες προσφορές και καλύτερα ποσοστά



