Sorry, this item is temporarily out of stock.

TDA7294 Mono 100W Power Amplifier Board Finished Board

Name: TDA7294 Mono 100W Power Amplifier Board Finished Board
Brand: Tlily
SKU: PTPSHQV
Availability: OutOfStock

Brand Tlily

New

Παρόμοια προϊόντα που πιστεύουμε ότι θα σου αρέσουν

Ενισχυτές & προενισχυτές ήχου

Πλακέτα μονάδας ασφαλείας κρυπτογράφησης TPM 2.0 14 ακίδων MS-4136 για μητρικές MSI18,62 €ΔΩΡΕΑΝ Παράδοση

Πλακέτα ενισχυτή 3.7V με τετράγωνο ηχείο χορού, υποστήριξη ενισχυτή Bluetooth11,31 €ΔΩΡΕΑΝ Παράδοση

PP500 Προενισχυτής Πικάπ Βινυλίου Ενισχυτής Πικάπ Ηνωμένου Βασιλείου12,09 €ΔΩΡΕΑΝ Παράδοση

TPA3255 2.0 Digital Amplifier Board DC24-48V Ισχυρή ισχύς 300W + Κατηγορία D31,35 €ΔΩΡΕΑΝ Παράδοση

Ενισχυτής ήχου μικροφώνου MIC-1000 με ενίσχυση 1000 φορές15,45 €ΔΩΡΕΑΝ Παράδοση

Στερεοφωνική πλακέτα ενισχυτή ισχύος Bluetooth 20W υψηλής ισχύος χωρίς κέλυφος6,85 €ΔΩΡΕΑΝ Παράδοση

Mini Stereo Amplifier Dc12V Dual Channel Hi-Fi Audio Player

12,38 €ΔΩΡΕΑΝ Παράδοση

Ενισχυτής 50W + 50W 100W Bluetooth 5.0 Ψηφιακός ενισχυτής ισχύος ήχου Μαύρος39,72 €ΔΩΡΕΑΝ Παράδοση

Would you like us to let you know when it's back?

Προσθήκη στο καλάθι

Περιγραφή & Λεπτομέρειες

Περίληψη

1. The noise of the switch is small and will not have too much impact on the speaker. It is recommended to add a horn protection circuit. The horn protection circuit can not only eliminate the impact noise of the power amplifier switch machine, but also avoid the output DC burning the horn when the power amplifier is damaged.
2. The bottom noise is small. Zero floating small, do not need to do any debugging after installation, the output zero drift voltage will generally not exceed 50mv, and is relatively stable.
3. Free debugging. As long as the connection is correct, no one is wrong, basically it is a success, no need to do any debugging, beginners also have a very high success rate.
TDA7294 Finished board
Amplifier board

TDA7294 Mono 100W Power Amplifier Board Finished Board Περιγραφή

1. The noise of the is small and will not have too much impact the speaker. It is recommended to add a horn protection circuit. The horn protection circuit can not only eliminate the impact noise of the power amplifier machine, but also avoid the output burning the horn when the power amplifier is damaged.
2. The bottom noise is small. Zero floating small, do not need to do any debugging after installation, the output zero drift voltage will generally not exceed 50mv, and is relatively stable.
3. Free debugging. As long as the connection is correct, no one is wrong, basically it is a success, no need to do any debugging, beginners also have a very high success rate.

Note:
1.2SC5200 + ZSA1943 are disassemble parts,but in good condition.
2.The PCB board has change to black, but the function is same.
Operating voltage: Dual 10 - 45V recommended Dual 35V
Rated output power: 100W(4 Ohm 35V)
Maximum output power: 150W (4 Ohm 45V) enormous heat, is not recommended
PCB size: 30 x 50 x 35mm
Pitch: 5.08mm
Hole distance between two power tube: 47mm
color:As shown
Material:PCB

Package Contents:
1 x Amplifier board