U100K 3.5In 1.44MB 1000 Floppy Disk Drive to USB Emulator Simulation for Musical Keyboard 34Pin Floppy Driver Interface

U100K 3.5In 1.44MB 1000 Floppy Disk Drive to USB Emulator Simulation for Musical Keyboard 34Pin Floppy Driver Interface Περιγραφή

Use A Normal USB Flash Drive As The Medium For The Transfer Design.
34pin Floppy Drive Interface, 5V Power Supply, Easy To Install.
1000 Partitions From A USB Flash Drive Can Be Used.Built-In Self-Formatting.
Floppy Drive With 34pin Connector And 5v Power Plug.Use A 2hd Floppy Disk With A Capacity Of 1.44mb.
Disk Format:Number Of Cylinders:80, Tracks:160 Sectors/Tracks

18 Bytes/Sector:512 Data
Transfer Rate:500 Kbps
Encoding Method:MFM
Control Board:
8 Segment Number:Represents The Partition Number
Green Led:Read And Write Operation Status
Usb Port:Connect A USB Flash Drive
Button:
The Left Button Is Used To Go Ten Digits, The Right Button Is Used To Go Ten Digits, And Pressing The 2 Buttons At The Same Is Ok
Rise To 100 Places
Format The Usb Flash Drive.
1. Format Usb Flash Drive As 1000 Partitions With The Built-In Self-Formatting Feature
2. Install The Emulator Your Computer And Format Each Partition By Operating Driver A.
3. Using The Emulator Ufa1m44-100, Insert The Usb Flash Drive Into It,
Connect To The Computer, For Windows Xp/2000/7, It Will Be Recognized As Removabe Driver A Or B, Formatting Each Partition.
The Ufa1m44-100 Also Has Built-In Self-Formatting.
Read And Write Data.
1. Install The Emulator Your Machine
2. Install The Emulator Your Computer
3. Connect A USB Flash Drive Your Computer To Read And Write Data Directories Through Software, For Windows XP/2000
4. Using The Emulator Ufa1m44-100, Insert It Into A Usb Flash Drive, Connect It To A Computer, Read And Write Data Under Windows Xp/2000/7.
Need Attention:Jumpers Are Not Supported
Colour:Black
Material:ABS

Package Contents:
1 * Host
1 * CD
2 * Jump Cap
4 * Screw