11.0 Development Module ESP32 KEY Built-in USB Flash Drive for PS4 11.0 System Firmware Gaming Accessory

11.0 Development Module ESP32 KEY Built-in USB Flash Drive for PS4 11.0 System Firmware Gaming Accessory leírása

for 11.0 consoles with systems between 9.03 and 11.
This device comes with USB flashes function, which can be accessed a computer with 1GB USB flashes (allowing for self updating of Goldhen files).

Colour:As Shown
Material:PCB+Metal
for this module to run successfully after normal is about 2-3 minutes. If situation where the device shuts down at the same after unsuccessful please the device and host. After it will automatically run.
Color device Operations light:Redness: The device is running incorrectly. Please check if each interfaces properly White: RunningGreen: Normal and Operations (it take several ten from to running the injections program): Running injections program.
Usage:For the first , open the networking the 11.0 set the Internet connection use the LAN connection cable customize PPPOE fill in the PPP for both the user name and password (note that filling in errors will to failure) the next two will be automatic will not be used. the Setups (no Setups required after just wait for the device to run).
the randomly provided USB data cable (1), USB charging cable (2), and Ethernet cable (3) in sequences, and the device will automatically turn and run.
After completing the injections, the Goldhen will in upper left corner, indicating the completion of the run. The device will automatically shut down.
No furthers are required for subsequent use, it will automatically run after the power is turned and the cable.

Package Contents:
1 * 11.0 Development Module