4X TDA7294 Mono 100W Power Amplifier Board Finished Board
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 135,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (Ingyenes) | csüt 8. - szo 10. okt.
Eladó: PUPUSUN
Visszaküldés: 30 nap
180 napos fizetési védelem
Összefoglaló
- 1. The noise of the switch is small and will not have too much impact on the speaker. It is recommended to add a horn protection circuit. The horn protection circuit can not only eliminate the impact noise of the power amplifier switch machine, but also avoid the output DC burning the horn when the power amplifier is damaged.
- 2. The bottom noise is small. Zero floating small, do not need to do any debugging after installation, the output zero drift voltage will generally not exceed 50mv, and is relatively stable.
- 3. Free debugging. As long as the connection is correct, no one is wrong, basically it is a success, no need to do any debugging, beginners also have a very high success rate.
- TDA7294 Finished board
- Amplifier board
4X TDA7294 Mono 100W Power Amplifier Board Finished Board leírása
1. The noise of the is small and will not have too much impact the speaker. It is recommended to add a horn protection circuit. The horn protection circuit can not only eliminate the impact noise of the power amplifier machine, but also avoid the output burning the horn when the power amplifier is damaged.
2. The bottom noise is small. Zero floating small, do not need to do any debugging after installation, the output zero drift voltage will generally not exceed 50mv, and is relatively stable.
3. Free debugging. As long as the connection is correct, no one is wrong, basically it is a success, no need to do any debugging, beginners also have a very high success rate.
Note:
1.2SC5200 + ZSA1943 are disassemble parts,but in good condition.
2.The PCB board has change to black, but the function is same.
Operating voltage: Dual 10 - 45V recommended Dual 35V
Rated output power: 100W(4 Ohm 35V)
Maximum output power: 150W (4 Ohm 45V) enormous heat, is not recommended
PCB size: 30 x 50 x 35mm
Pitch: 5.08mm
Hole distance between two power tube: 47mm
color: As shown
Material: PCB
The panel color is random, no specification is accepted
Package Contents:
4 x Amplifier board
Részletek
| OPC | PSVH2FN |
|---|---|
| Márka | Semoic |
| Kódok | 6031061445503 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 8cm |
|---|---|
| Width | 8cm |
| Length | 10cm |
| Weight | 0.114kg |
| Colour | As shown |
| Material | PCB |
Eladók összehasonlítása: 4X TDA7294 Mono 100W Power Amplifier Board Finished Board
- Új innen 15 556,33 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(228 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
15 556,33 Ft
|
+Free Delivery
Várható szállítás:
8-10 okt.
|
15 556,33 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el