5V 12V 24V Cycle Timer , Programmable Power Timing Controller Compatible?with Router Modem Auto Reboot No Case

5V 12V 24V Cycle Timer , Programmable Power Timing Controller Compatible?with Router Modem Auto Reboot No Case leírása

Button Settings:

1. Set System : Long press the SET button to enter system setting. The hour digit flashes. Press the ADJ button to adjust the value.
After setting the hour, press SET to configure minutes. Press ADJ to change the minute value. Once minutes are set, press SET to calibrate seconds; press ADJ to reset seconds to zero. Press SET to save and exit after calibration, or the settings will auto-save and exit after 10 seconds of inactivity.
2. Set Timing Points: Short press the SET button to enter timing point configuration. Red LEDs 1~6 indicate which timing point you are editing. Press the ADJ button to modify values.
Press SET to to the next item after finishing one setting. The LED indicates the action to trigger at this point: / OFF / Disable. Press the ACTION button to change the target action.
Settings auto-save and exit after 10 seconds of inactivity.
3. Under normal working status, press the ADJ button to turn the display screen /off (with power-off memory function).
ADJ Button
4. Under normal working status, press the ACTION button to toggle the output state.
ACTION Button
Output:
Output: OFF
Color: As Shown
Material: Plastic+Metal
Specification: Without shell

Package Contents:
1*Timer