DIY Digital Oscilloscope Kit STC8K8A Microcontroller Electronic Soldering Practice Loose Parts
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 130,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Kamatmentes fizetési lehetőségek elérhetők
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (Ingyenes) | hét 10. - sze 12. aug.
Visszaküldés: 30 nap
180 napos fizetési védelem
Legnépszerűbb termékek a(z) Mérő detektorok kategóriában
Összefoglaló
- 1. Indicator light: Usually, when the indicator light is on, it indicates that the sampling is running,
- 2. There are three triggering modes: automatic mode, normal mode, and single mode
- 3. Trigger slope: The trigger slope determines whether the trigger point is on the rising edge or falling edge of the signal
- 4. Trigger level: For repeated signals, the trigger level can stabilize their display. For a single signal, the trigger stage can capture it
- 5. Save Settings: When exiting the settings interface, all parameters of the settings interface and the main interface will be saved in EEPROM
DIY Digital Oscilloscope Kit STC8K8A Microcontroller Electronic Soldering Practice Loose Parts leírása
1. Indicator light: Usually, when the indicator light is , it indicates that the sampling is running,
2. There are three triggering modes: automatic mode, normal mode, and single mode
3. Trigger slope: The trigger slope determines whether the trigger point is the rising or falling of the signal
4. Trigger level: For repeated signals, the trigger level can stabilize their display. For a single signal, the trigger stage can capture it
5. Save Settings: When exiting the settings interface, all parameters of the settings interface and the main interface will be saved in EEPROM
Waveform generator: PWM (PWM generator) and SIN (sine wave generator), adjust RP1 and RP2 to change the amplitude respectively
Supply voltage: 5V(micro-usb)
Voltage range: 0-30V (LSB needs to be adjusted)
Level sampling: 10kHz 100us /div
Sec/div:500ms,200ms,100ms,50ms,20ms,
10ms, 5ms, 2ms, 1ms, 500us, 200us, 100us
Note:
Installation guide not included,
Please check as much as possible to make sure the item is what you need.
Tips: The product may be updated constantly ,Due To Different Batches, The Actual Product May Have Slight Differences Or Color Differences, Which Does Not Affect Use
Colour:Photo Color
Material:PCB
Package Contents:
1 x DIY Digital Oscilloscope Kit
Részletek
| OPC | PVQBDKS |
|---|---|
| Márka | Typecat |
| Kódok | 6033072082777 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 4cm |
|---|---|
| Width | 10cm |
| Length | 11cm |
| Weight | 0.062kg |
| Colour | Photo Color |
| Material | PCB |
Eladók összehasonlítása: DIY Digital Oscilloscope Kit STC8K8A Microcontroller Electronic Soldering Practice Loose Parts
- Új innen 8 948,58 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(109 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
8 948,58 Ft
|
+Free Delivery
Várható szállítás:
10-12 aug.
|
8 948,58 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el