Flocking Kit Static Grass Applicator ABS Flocking Machine with Antislip Handle for DIY Scenic Modelling Diorama Scenery
Raktáron
Ezért fogod szeretni az OnBuy-on való vásárlást:
- Szerezz Cashback pénzvisszatérítést minden vásárlás után, és költsd el azonnal a következő rendelésnél.
- Ingyenes kiszállítás – több millió termékre az oldalon
- Vásárlóink elégedettek velünk, már 127,000 Kiváló értékelést kaptunk!
Az OnBuy-on értékesített termékek ára tartalmazza az áfát.
Kamatmentes fizetési lehetőségek elérhetők
Teljes termékleírás és részletek megtekintése
Kézbesítés: Normál (525,41 Ft) | kedd 7. - szo 11. júl.
Visszaküldés: 30 nap
180 napos fizetési védelem
Összefoglaló
- 1. Load the battery before use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step
- 2. Put in the grass powder. It is suggested that the length of the grass powder is more than 5mm, which is more effective.Then tighten the lid.
- 3. In the target model and on the ground table, white latex is drawn and applied evenly, ready to start sprinkling grass powder
- 4. Press the surface of the target platform with the negative electrode electrical connector, as close as possible, and then use the grass planter to start spraying the grass powder 2-3cm away from the target platform.
- 5. After the grass powder is finished, pour out the extra grass powder or use a model vacuum cleaner to suck it up.Trim the haystack with small scissors and a toothpick until it grows evenly.
Flocking Kit Static Grass Applicator ABS Flocking Machine with Antislip Handle for DIY Scenic Modelling Diorama Scenery leírása
1. Load the battery before use and check whether the wires in the container have contact with the metal mesh, which is the key inspection step
2. Put in the grass powder. It is suggested that the length of the grass powder is more than 5mm, which is more effective.Then tighten the lid.
3. In the target model and the ground table, white latex is drawn and applied evenly, ready to start sprinkling grass powder
4. Press the surface of the target platform with the negative electrode electrical connector, as close as possible, and then use the grass planter to start spraying the grass powder 2-3cm away from the target platform.
5. After the grass powder is finished, pour out the extra grass powder or use a model vacuum cleaner to suck it .Trim the haystack with small scissors and a toothpick until it grows evenly.
Material:Metal + Plastic
colour:Black
Package Contents:
1 x flocking machine (2 x 1.5V batteries not included)
1 x small diameter grille
1 x large diameter grille
1 bag x grass
1 x brush
1 x Planting Template Tool
Részletek
| OPC | PVJ8XY2 |
|---|---|
| Márka | Exogio |
| Kódok | 4712984168190 (EAN) |
Termékadatok
| Height | 12cm |
|---|---|
| Width | 12cm |
| Length | 30cm |
| Weight | 0.314kg |
| Colour | Black |
| Material | Metal + Plastic |
Eladók összehasonlítása: Flocking Kit Static Grass Applicator ABS Flocking Machine with Antislip Handle for DIY Scenic Modelling Diorama Scenery
- Új innen 12 362,95 Ft
| Eladó | Értékelések | Garancia | Visszaküldések | Ár | Kiszállítás | Összesen | Mennyiség |
|---|---|---|---|---|---|---|---|
|
Feladás helye:
|
(108 értékelés) | - |
30 nap
Ingyenes visszaküldés Nem
|
11 837,54 Ft
|
+525,41 Ft Delivery
Várható szállítás:
7-11 júl.
|
12 362,95 Ft
|
Vásárlás közben is keressen pénzt azonnali Cashback-kel minden termékre.
Nincs apróbetűs rész, nincs költség
- Jóváírva az OnBuy-fiókján
- Költse el a következő vásárlásán
- Gyűjtse vagy vegye fel
Legyen Cashback VIP-tag
Már egyetlen vásárlással is nagyobb kedvezményeket és jobb árakat érhet el