Sajnáljuk, ez a termék átmenetileg nincs raktáron.
New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure
További termékek, amelyek érdekelhetnek
Szeretnéd, ha tudatnánk veled, ha újra elérhető lesz?
Összefoglaló
- Air Conditioner Start-up Mode: Cooling, 24 degrees (not adjustable)
- Cyclic Sending: The controller automatically sends a start-up command every 30 minutes to ensure the air conditioner is always on.
- Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
- Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns on, the installation location is suitable; if it fails, the installation location needs to be readjusted.
- Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back on. The controller will automatically send a start-up command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: DC-5V; Standby Power Consumption:
New USB-Enabled Air Conditioner Module: Automatic Start Upon Power Restoration and Automatic Restart Upon Power Failure leírása
Air Conditioner Start- Mode: Cooling, 24 degrees (not adjustable)
Cyclic Sending: The controller automatically sends a start- command every 30 minutes to ensure the air conditioner is always .
Setting Cyclic Sending: Press and hold the "Send" button. If the red indicator light flashes twice, it's cyclic sending; if it flashes once, it's not cyclic sending.
Installation Test: Turn off the air conditioner, then briefly press the send button. If the air conditioner turns , the installation location is suitable; if it fails, the installation location needs to be readjusted.
Simulated Power Off Test: Turn off both the air conditioner and the controller. Wait a moment, then turn the power back . The controller will automatically send a start- command approximately 1 minute after power is restored. If the test is normal, it is ready for use. Product Parameters: Power Supply Voltage: -5V; Standby Power Consumption:
Részletek
| OPC | PVVK2YM |
|---|---|
| Márka | Tlily |
| Kódok | 4713642560332 (EAN) |
| Termék- és biztonsági információk |
Termékadatok
| Height | 3cm |
|---|---|
| Width | 5cm |
| Length | 10cm |
| Weight | 0.055kg |
| Colour | Transparent Color |
| Material | Plastic |