SK3500-SPI 3.3G VRX Wireless Analog SPI Open Source Receiver Module

SK3500-SPI 3.3G VRX Wireless Analog SPI Open Source Receiver Module Description

SK3500-SPI Image Transmitter Receiver Module (3.1G-3.8G SP Mode),The SK3500-SPI supports CVBS signal output and features low latency and strong anti-interference capabilities.
It is widely used in FPV drone flight, outdoor entertainment, racing, and professional aerial photography. It allows developers to extend and customize functionality based on the existing SPI protocol.

POWER SUPPLY: DC 5.0V
Current Consumption: 420mA+30mA 5V
Environmental Specification:
Operating Temperature: -10C-+65 C
Storing Temperature:-30C-+85C
Operating humidity: 85%RH
:
Receiving frequency range: 3100-3800MHZ
Demodulation system: FM/PLL
IF: 480MHz
LO Frequency stabilization:200kHz
LO Frequency : +200kHz
LO Control: PLL
Input LO Leak: -65dBm
Receiving Sensitivity:-95dBm+3dBm
Video Characteristics:
Video Output Level: 1+0.2Vp-p, TyP.
Video Polarity: Negative polarity Negative
Video Frequency Response:+5 dB, Max.50Hz-6MHZ
Differential Gain: +5 %, Max
Differential Phase: +5 . Max
3dB IF WIDEBAND:16.5MHZ
S:38dB, Min
RSSI slope:22mv/dBm
Color: As Shown
Material: PCB

Package Contents:
1 x VRX Wireless Analog

Only the above package content, other products are not included.
Note: Light reflection and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.