2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
Op voorraad
Waarom je van winkelen bij OnBuy zult houden:
- Verdien Cashback bij elke aankoop – besteed het direct aan je volgende bestelling
- Gratis bezorging – op miljoenen artikelen op de site
- Klanten waarderen ons – 133,000 beoordelingen met een “Uitstekende” score
Prijzen zijn inclusief btw.
Rentevrije betaalopties beschikbaar
Bekijk de volledige productbeschrijving & details
Bezorging: Standaard (€ 4,00) | do 17de - di 22ste sep.
Verkocht door: BALURE
Retouren: 30 dagen
180 dagen betalingsbescherming
Misschien vind je dit ook leuk
Samenvatting
- 1. Disconnect all power(AC& DC)Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
- 3. Connect Positive and Lamp negative feed wire.Connect the DC.power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a DC negative bus
- bar.
- 4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
- 5. Mount the switch panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& DC powers to supply power to the panel. Turn on and off all branch circuits to check if the panel works normally.
2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys Beschrijving
1. Disconnect all power(AC& )Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
3. Connect Positive and Lamp negative feed wire.Connect the .power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a negative bus
bar.
4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
5. Mount the panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& powers to supply power to the panel. Turn and off all branch circuits to check if the panel works normally.
Ratings: 12V
Panel Rating: 10 A
Product Dimensions: (W x H) 69 x 69mm
Colour: Black
Material: nylon + metal
Package Contents: 2 x Ignition Panel
4 x key
Details
| OPC | PX5Y9N6 |
|---|---|
| Merk | Jojomino |
| Codes | 6032442515389 (EAN) |
| Product- en veiligheidsinformatie |
Productgegevens
| Height | 15cm |
|---|---|
| Width | 7.5cm |
| Length | 8.5cm |
| Weight | 0.293kg |
| Colour | Black |
| Material | nylon + metal |
Vergelijk verkopers voor 2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
- Nieuw van € 49,93
| Verkoper | Beoordelingen | Garantie | Retourneren | Prijs | Bezorging | Totaal | Aantal |
|---|---|---|---|---|---|---|---|
|
Verzonden vanuit:
|
(352 beoordelingen) | - |
30 dagen
Gratis retourneren Nee
|
€ 45,93
|
+€ 4,00 Delivery
Geschatte bezorging:
17de-22ste sep.
|
€ 49,93
|
Verdien terwijl je shopt met directe Cashback op alles.
Geen addertjes, geen kosten
- Uitbetaald op je OnBuy-account
- Besteed het bij je volgende aankoop
- Bewaar het of neem het op
Word een Cashback VIP
Slechts 1 aankoop ontgrendelt grotere deals en kortingen