2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 133,000 de recenzii cu evaluare “Excelent”
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Prioritate (Gratuit) | mie 16 - lun 21 sept.
Vândut de: BALURE
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Te-ar putea interesa și
Rezumat
- 1. Disconnect all power(AC& DC)Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
- 3. Connect Positive and Lamp negative feed wire.Connect the DC.power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a DC negative bus
- bar.
- 4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
- 5. Mount the switch panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& DC powers to supply power to the panel. Turn on and off all branch circuits to check if the panel works normally.
Descriere 2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
1. Disconnect all power(AC& )Disconnect positive cables from all batteries and AC.shore power cord from the yacht.2. Cut opening for mounting location.Using the mounting dimensions provided to measure and cut out the mounting hole in the.surface where the panel is to be mounted.
3. Connect Positive and Lamp negative feed wire.Connect the .power source(the batteries) to the screw terminal away from the LED. Then connect the LED negative wire (black) to a negative bus
bar.
4. Connect the LED positive wire and devices.Connect the LED positive wire (red) to screw terminal near the LED. Connect the device or distribution panels to the same screw terminal.
5. Mount the panel.Clean the surface where the panel is to be mounted carefully. Place the panel and screw down the panel to the mounting surface as tight as possible with self-tapping screws.6. Reconnect and Test.Reconnect all the AC& powers to supply power to the panel. Turn and off all branch circuits to check if the panel works normally.
Ratings: 12V
Panel Rating: 10 A
Product Dimensions: (W x H) 69 x 69mm
Colour: Black
Material: nylon + metal
Package Contents: 2 x Ignition Panel
4 x key
Detalii
| OPC | PX5Y9N6 |
|---|---|
| Brand | Jojomino |
| Coduri | 6032442515389 (EAN) |
| Informații despre produs și siguranță |
Date despre produs
| Height | 15cm |
|---|---|
| Width | 7.5cm |
| Length | 8.5cm |
| Weight | 0.293kg |
| Colour | Black |
| Material | nylon + metal |
Compară vânzătorii pentru 2X Universal 12V Car Boat Motorcycle Ignition Key Ignition Panel 2Position with 4 Keys
- Nou de la 298,29 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(352 recenzii) | - |
30 zile
Retur gratuit Nu
|
298,29 RON
|
+Free Priority Delivery
Livrare estimată:
16-21 sept.
|
298,29 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase