0.91inch OLED 128x32 I2C IIC SSD1306 OLED Display Module for RPI Raspberry Pi 1, B+, 2, 3 and Zero

0.91inch OLED 128x32 I2C IIC SSD1306 OLED Display Module for RPI Raspberry Pi 1, B+, 2, 3 and Zero Beskrivelse

This OLED is designed for Raspberry Pi, it can work with Pi 1, B +, Pi 2, Pi 3 and Pi Zero.
The PiOLED comes with a monochrome 128x32 OLED, with pixels. The OLED screen uses only the I2C pins so you have plenty of GPIO connections available for LED sensor buttons, etc. It is also nice and compact so that it fits in any case
These screens are small, only 1Inch diagonal, but very legible due to the high contrast of an OLED screen
This screen is made of 128x32 single OLED pixels, no backlighting is required
Using the screen is very easy, our Python library will guide you to draw images, text, make animations or simple video

It comes completely pre-assembled and tested so you do not need to do anything else than plug it in and install our Python code.
Characteristic:
6 pin header
Voltage: 3.3 v
Use 2 GPIO pins
Interface: CII
0x3c: SSD1306
Note:
only screen module, without for Raspberry Pi board.
the printed characters are slightly different, which does not affect the use.
Colour:
Material:Metal+Plastic

Package Contents:
1 * Module