Produktbilder
Sorry, this item is temporarily out of stock.
10X 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight
Brand Bobotron
New
Lignende produkter vi tror du vil like
Would you like us to let you know when it's back?
Beskrivelse og detaljer
Sammendrag
- UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port on the computer and acts as a serial-line for the CAN bus interface.
- With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface on Linux.
- The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same time, it can also be used as USB to CAN application on Klipper.
- supports CANable
- 3D Printer UCAN Board
10X 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight Beskrivelse
UCAN is a small low-cost open source USB to CAN adapter, compatible with CANable hardware. The UCAN enumerates as a virtual serial port the computer and acts as a serial- for the CAN bus interface.
With the alternative Candlelight firmware, UCAN is enumerated as the native CAN interface Linux.
The UCAN adapter is compatible with ARM-based embedded platforms such as for Raspberry Pi, for Raspberry Pi Zero, for ODROID, for BeagleBone, etc. At the same , it can also be used as USB to CAN application Klipper.
Based STM32F072
Type-C USB socket
Supports CAN2.0A and B, baud rates to 1M
Compatible with CANable
Support with for CAnable / CandleLight / Klipper firmware
3-pin screw terminal: CANH, CANL, GND
Jumper to enter bootloader for firmware updates
Onboard 120R termination default or Jumper to enable/disable termination
type: UCAN Board
color:Black+green
Material:PCB+plastic+metal
Package Contents:
10 x UCAN Board
Detaljer
| OPC | PWH7QGR |
|---|---|
| Merke | Bobotron |
| Koder | 6031326336614 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 20cm |
|---|---|
| Width | 2cm |
| Length | 7cm |
| Weight | 0.08kg |
| Colour | Black&Green |
| Material | PCB+Plastic+Metal |
Would you like us to let you know when it's back?
10X 3D Printer UCAN Board Based STM32F072 USB to CAN Adapter Support with for CAnable / CandleLight
New
Du vil kanskje også like