2.4G 12CH Remote Control Module with Type-C Charging for DIY Projects Wireless Receiver Board Motor Controller

2.4G 12CH Remote Control Module with Type-C Charging for DIY Projects Wireless Receiver Board Motor Controller Beskrivelse

1. Powerful 7.4V power supply, with a motor current of 3.5A
2. Built-in Type-C charging, supports direct charging of 3.7V lithium batteries
3. -board 5V buck converter, perfectly drives 180/360 servos
4. Pair-by-pair coding ensures no frequency interference when multiple sets are used the same field
5. 50-meter remote control range, 12-channel full-scale speed control

Module Mode Switching Instructions
1. Power the remote control board and turn the . Press and hold the and K4 buttons simultaneously. The LED will turn off. After approximately 5 seconds, the LED will turn . At this point, tap the K1 button; the LED will flash. The number of flashes indicates the current mode. Once you have selected the desired mode, release the and K4 buttons. Note: During the mode adjustment process, you must keep buttons and K4 pressed down continuously until you reach the desired mode, then release them.
Regarding Remote Control Range
This module features a built-in 2.4 GHz antenna that cannot be modified. The tested range in open land areas is approximately 60 meters, and approximately 30 meters underwater. Ensure there are no objects emitting interfering signals near the antenna, such as batteries or various metals. Also, do not place the module inside a metal enclosure, as this will severely interfere with signal transmission.
Color: Black
Material: ABS

Package Contents:
1x Remote Control Module Kit