2X Filament Buffer for 3D Printers,Auto Filament Feeding and Switching,Ensures Continuous Printing

2X Filament Buffer for 3D Printers,Auto Filament Feeding and Switching,Ensures Continuous Printing Beskrivelse

Smooth Remote Feeding for 1.75mm Filament: Designed specifically for remote filament feeding, the 3D Printer Filament Buffer ensures stable, low-resistance filament delivery during printing - enhancing print accuracy and reducing strain the extruder.
Automatic Filament Buffering: The buffer automatically preloads a section of filament to the hot end. This reduces the pulling force required by the extruder, maintains consistent pushing pressure, and enhances overall print quality stability.
Auto Filament Refill: When the primary filament runs out, the backup filament will automatically feed in based the preset - no manual intervention and no interruption to your print. Ideal for extended or unattended print jobs.
Easy Setup & Broad Compatibility: Quick to install and simple to use - an ideal upgrade for both hobbyists and professional 3D printing users.

For (Used without AMS)
Compatible Models:X1 Carbon, X1, X1E, P1P, P1S, H2D
A1, A1 (Replace the five-way connector with a single connector)
For (Used without CFS)
Compatible Models: K1, K1C, K1 SE, K1 MAX, , , PRO, Hi, for -3 V3, for -3 V3 , for -5 MAX, for -5 S1, for Sermoon D3 Pro, for Sermoon D3
Incompatible Models: for -3 V3 KE, for -3 V3 SE, for -3 S1 Pro, for -3 S1 , for -3 S1, for -3, for -5 , for -3 V2, for -3 Neo, for -3 Max Neo, for -3 Max, for -2, CR-10 SE, CR-M4, CR-6 SE, CR-20 Pro, CR-10S Pro V2, CR-10 Pro, CR-10 , CR-10, for Sermoon V1 Pro
For (Used without ACE Pro)
Compatible Models: for Kobra S1
K3M, K3C (The auto filament refill function may fail due to the five-way extruder structure of the K3M/K3C)
For
Compatible Models:M5
For Prusa
Compatible Models:XL, M