Produktbilder
Beklager, denne varen er midlertidig utsolgt.
4X FS2A 4CH AFHDS 2A Compatible Receiver PWM Output for Flysky I6 I6X I6S Transmitter
Ny
Lignende produkter vi tror du vil like
Vil du at vi skal gi deg beskjed når den er tilbake?
Beskrivelse og detaljer
Sammendrag
- 1. Press and hold the key on the receiver and connect the power to the receiver. The blue light on the receiver flashing, get into binding mode.
- 2. Set the transmitter into bind mode (confirmed AFHDS 2A protocol). After getting into bind mode, the receiver light changes from flashing to slow flash.
- 3. Transmitter get out of bind mode, then the receiver blue light becomes bright. Indicates that the signal received is successful.
- Failsafe settings:
- FS2A Receiver
4X FS2A 4CH AFHDS 2A Compatible Receiver PWM Output for Flysky I6 I6X I6S Transmitter Beskrivelse
1. Press and hold the key the receiver and connect the power to the receiver. The light the receiver flashing, get into binding mode.
2. Set the transmitter into bind mode (confirmed AFHDS 2A protocol). After getting into bind mode, the receiver light changes from flashing to slow flash.
3. Transmitter get out of bind mode, then the receiver light becomes bright. Indicates that the signal received is successful.
Failsafe settings:
The receiver can normally receive the transmitter signal, push the rocker to the failsafe set, long press the receiver bind button, the light flashes quickly several times and then always bright, failsafe settings is successful.
size:11*25*3mm
colour:black
Material:PCB
Package Contents:
4 * FS2A 4CH AFHDS 2A Compatible Receiver
4 * parts
Detaljer
| OPC | PP8SVXS |
|---|---|
| Koder | 4711920551492 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 4cm |
|---|---|
| Width | 3cm |
| Length | 6cm |
| Weight | 0.014kg |
| Colour | black |
| Material | PCB |