Sorry, this item is temporarily out of stock.
For Flipsky Wireless Module 2.4G for VESC & VESC Tool Electric Skateboard(B)
Lignende produkter vi tror du vil like
Would you like us to let you know when it's back?
Sammendrag
- Description
- Kindly Reminder: This bluetooth module can only support Android mobile device.
- Used to communicating between the VESC and VESC Tool (mobile) over BLE. Note that the UART port on the VESC must be enabled with a baud rate of 115200 for this to work. The UART port on VESC can work only under 115200 baud
- Operating voltage: 2.0V ~ 12V Onboard Chip: NRF51822
- Actual use distance: The distance to communicate with VESC is about 15 meters
For Flipsky Wireless Module 2.4G for VESC & VESC Tool Electric Skateboard(B) Beskrivelse
Description
Kindly Reminder: This module can only support Android mobile device.
Used to communicating between the VESC and VESC Tool (mobile) over BLE. Note that the UART port the VESC must be enabled with a baud rate of 115200 for this to work. The UART port VESC can work only under 115200 baud
Operating voltage: 2.0V ~ 12V Onboard Chip: NRF51822
Actual use distance: The distance to communicate with VESC is about 15 meters
Frequency range: 2.4GHz
2.4 GHz multiprotololl RF receiver
ARM Cortex-M0 32 bit processor
256kB flash & 16kB RAM
PCB size:27mm x 13mm
2.0mm seven-pin four-wire connector length:90mm
Antenna length:145mm
net weight:3.5g
Colour: as shown
Material: plastic+metal
Note: Due to different product batches, the appearance may be different, which does not affect use.
Package Contents:
1 x Skateboard Module(For V6)
Detaljer
| OPC | PXX2QZ2 |
|---|---|
| Koder | 6031698406571 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 1cm |
|---|---|
| Width | 7cm |
| Length | 7cm |
| Weight | 0.0025kg |
| Colour | as shown |
| Size | b |
| Material | plastic+metal |