GODIAG GT110 for for for CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN

GODIAG GT110 for for for CAN-Bus UDS 4th Generation IMMO System Test Platform Cable with POGO PIN Beskrivelse

GODIAG GT110 FOR for for CAN-Bus UDS 4th Generation IMMO System Test Platform Cable supports for for for and other models, and performs offline POGO PIN data reading and writing. lt is for dashboards key programming (including Boot Probe).of all UDS systems for , for and for .
The product can display the current working voltage and current, has a power , the simulation ignitions , and a buzzer to prompt the ignitions start and shut down.
It supports CANH UDS communication indication, CR2032 remote key battery detection, key and IMMO instrument synchronization test, intelligent IMMO system emergency start area induction detection, IMMO combination instrument offline diagnosis, instrument IMMO data reading and writing, instrument mileage repair, key matching and other functions
It can be used with all devices like Launch, Autel, VVDI2, Vagcom5053, Lonsdor K518, etc.

Product Functions:
1. Use POGO PIN to read and write data to the dashboard.
2. Offline connection to the dashboard to convert to standard OBD2.
3. Perform key chip and instrument synchronization test.
4. Independent power
5. Simulate ignitions
6. Current working voltage display
7. CR2032 remote key battery detection
8. Current instrument working current display
9. CANH UDS communication indicator light
10. Key induction adapter with light
11. The pogo PIN is more stable to hold and it does not damage the cable.
POGO PIN usage steps:
1. Connect the power supply [Note: the power must be off].
2. Press the IGN ignitions power [the IGN ignitions must be turned ].
3. Connect the instrument plug.
4. Find the POGO PIN connection point of the corresponding instrument and connect it with a probe.
5. Turn the power sw