HAT310 ATS Controller for Generator Set Control Panel Module

HAT310 ATS Controller for Generator Set Control Panel Module Beskrivelse

1) With auomatic transfer and restore function.
2) With under volatge and loss of phase detection function.
3) LED indicators the pannel can show working status of controller clearly.
4) Applicable for 2 isolated neutral .
5) Mains normal delay configured via potentiometer (range: 1~60s), and generator normal delay via potentiometer (range: 1~60s).

6) Mains is unavailable, if any phase voltage belows minimum working voltage or phase loss occurred genset will be started.
7) Output contact capacity of mains and generator transfer relay is 16A AC250V, which can directly used to drive conversion.
8) Output contact capacity of GENS START relay is 16A AC250V, it is volt free normally open/normally-closed contect.
9) Strong anti-electromagnetic interference performance enable controller to use in the enviroment with strong electromagnetic interfrence.
10) Modular design, self extinguishing ABS plastic shell, pluggable terminal, compact structure.
11) Two installation ways: internal 35mm guide rail and internal screw mounting.
Colour:As Shown
Material:plastic

Package Contents:
1 x HAT310 ATS Controller(Due to different product batches, the appearance may vary, which does not affect the use)