PHS-3C PH Desktop Calibration Acidity Meter PH/Temp Multi-Parameter Tester Laboratory Water Quality Analyzer EU PLUG

PHS-3C PH Desktop Calibration Acidity Meter PH/Temp Multi-Parameter Tester Laboratory Water Quality Analyzer EU PLUG Beskrivelse

The PHS-3C pH meter is a portable microprocessor-based pH/temperature meter. The handy key board for the selection of the various functions. The possibility of automatically correcting errors in measurement due to temperature and the extreme simplicity of regulation all serve to permit a rapid and reliable execution of calibration and measurement.
The display the front panel reveals the temperature pH readings taken by the instrument. The instrument comes supplied with a combined pH electron and a probe for the measurement and compensation of the temperature.

Specification :
1.Range:
PH: 0.00-14.00PH
Temp: 0-100
2.Resolution :
PH: 0.01PH
Temp: 0.1
3.Accuracy:
PH: 0.02PH
Temp: 0.5
4.Display:
PH: 4-digital LED
Temp: 3-digital LED
5.Automatic Temperature Compensation:0-50
6.Power Supply: In Label
7.Operating Temperature: 0-50
8.Calibration: 2 points with auto bufferrecognition
Operation:
1.Connecting AC power supply. Turn the meter by"-OEF" located back ofthe instrumen.
2.Connect the electrode to the iack back of the instrument.
3.Remove the protective cap of electrode. Put the electrode into the measured solution to be tested.
Plug Type:EU Plug,it applies to Indonesia, Germany, France, Spain, Italy and so
Voltage: AC220V
Color: As Shown
Material: plastic

Package Contents:
1 x PH Desktop Automatic Calibration Acidity Meter(The words the product may vary due to different batches, but it will not affect the use)