Produktbilder
På lager
Derfor vil du elske å handle hos OnBuy:
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (21,20 kr) | ons 2. - fre 4. des
Solgt av: firstlove
Returer: 30 dager
180 dagers betalingsbeskyttelse
Sammendrag
With TACHOEMU you can easy solve this problem. The TACHOEMU allows the removal of the factory Tachograph from Compatible?with , Compatible?with and Compatible?with vehicles while retaining the normal operation of the speedometer.
Many Compatible?with , Compatible?with and Compatible?with light commercial vehicles are fitted with digital tachograph (usually digital Actia smartach) . some vehicles, converted Compatible?with personal use, the Tachograph is an unneccessary annoyance.
Unfortunately, simply removing the Tachograph is not possible because the Tachograph also produces a speed signal Compatible?with the Engine ECU and speedometer.
Installation guide not included, we strongly recommend you seek professional installation.
Please check as much as possible to make sure the item is what you need.
tachograph skip emulator
compatible with these vehicles:
Compatible?with : Ducato (2007+);
Compatible?with : Boxer (2007 +);
Compatible?with : Jumper (2007+), Relay (2007+);
This tachograph emulator can convert tachograph speed sensor signal to digital signal Compatible?with instrument cluster speedometer.
How to install:
remove tachograph from car and disconnect all connectors from it;
A connector find pin A5 (-Batt), connect it (short wires) with connector B2 (Sensor-) wire and with TACHOEMU pin GND;
A connector find pin A3 (+Ignition 15), connect it (short wires) with connector B1 (Sensor+) wire and with TACHOEMU pin +12V;
wire from pin B3(Speed Signal) connect with TACHOEMU pin out;
wire from pin B7(Speed Out) connect with TACHOEMU pin in;
If speedometer show incorrect speed after TACHOEMU instalation:
You can change K-factor (speed impulse / kilometer) . Connect TACHOEMU to car and make driving test. If vehicle speed not correspond speedometer - change K-factor.
Default programmed TACHOEMU K-factor is 5100 imp/Compatible?with .
You can change K-
Detaljer
| OPC | PYVCRSR |
|---|---|
| Merke | Bobotron |
| Koder | 4714246686206 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 5cm |
|---|---|
| Width | 8cm |
| Length | 10cm |
| Weight | 0.04kg |
| Colour | As Shown |
| Material | PCB |
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(26 anmeldelser) | - |
30 dager
Gratis retur Nei
|
613,35 kr
|
+21,20 kr Delivery
Estimert levering:
2-4 des
|
634,55 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser
Du får umiddelbar Cashback kun hos OnBuy! Skriv inn e-posten din nedenfor, så sender vi deg en kopi av handlekurven din slik at du sparer tid senere.
Ved å oppgi e-postadressen din blir du automatisk lagt til i databasen vår, hvor du kan få personlige Cashback-tilbud og tidlig tilgang til våre beste tilbud. Du kan når som helst melde deg av e-postene våre, og vi deler aldri opplysningene dine med andre. Les vår personvernerklæring og vilkår og betingelser for å finne ut mer.
Vil du ha tilgang til personlige tilbud og de beste Cashback-ratene? Meld deg på nyhetsbrevet vårt nedenfor.
Du kan når som helst velge å ikke motta e-post fra oss, og vi deler aldri opplysningene dine med andre. Les vår personvernerklæring og våre vilkår og betingelser for å finne ut mer.
Denne siden har utløpt.
Oppdater og fortsett