Stud Finder Wall Scanner-5 in 1 Wall Detector Electronic Stud Sensor Pipe Joist Finders Center Finder

Stud Finder Wall Scanner-5 in 1 Wall Detector Electronic Stud Sensor Pipe Joist Finders Center Finder Beskrivelse

1/2inch Stud Scan Mode:Detects wood or metal studs to 13mm deep
1inch Stud Scan Mode:Detects wood or metal studs to 25mm deep
1 1/2inch Stud Scan Mode:Detects wood or metal studs to 38mm deep
Metal Mode:Detects metal to 80mm for magnetic(60mm for non-magnetic)deep
AC Mode:Detects live unshielded AC wires to 51mm deep

Please note:the physical slightly color difference or difference, does not affect the use, please do not mind, thank you!
Metal Depth Indicator
Green Backlight
Low Voltage Indicator
Battery Type:9V battery(6F22,not include)
Operating Current:Less than 50ma
Shutdown Current:Less than 10UA
Automatic Shutdown :3 minutes
1. Detection Mode Selection
Stud Mode
In stud mode, there are 3 scan modes o choose for properly thick of the scanning surface:
1/2inch Scan Mode can detect 1/2 in. (13mn) deep.
1 inch Scan Mode can detect 1 in. (25mm)deep.
1 1/2inch Scan Mode can detect 1 1/2 in.(38mm) deep.
If you don't know the depth of the detection, it is recommended to use 1/2inch scan mode first. When 1/2inch scan mode is not detected, use 1inch or 1 1/2inch scan mode instead.
Metal Mode:
The detection of magnetic metal can be as deep as 3.2 in. (80mm)(diameter 15mm galvanized steel tube) It can detect non-magnetic metals tc 2.4 in. (60mm) (diameter 13mm copper tube).
AC Mode:
Detect unshielded AC live wire to 2 in. (51mm) deep.
Colour:Black
Material:Plastic
Size:About 165x74x40mm

Package Contents:
1 * Stud Finder Wall Scanner