Turbidity Sensor Water Turbidity Module Turbidity Module Multifunctional Convenient Mixed Water Detection Module

Turbidity Sensor Water Turbidity Module Turbidity Module Multifunctional Convenient Mixed Water Detection Module Beskrivelse

1. Turbidity Sensor How The Sensor Works: When Light Passes Through A Certain Amount Of Water, The Amount Of Light Transmitted Depends The Amount Of Dirt In The Water. As The Amount Of Dirt Increases, The Amount Of Light Penetrating The Water Sample Decreases, And A Turbidity Sensor Measures The Amount Of Light Transmitted To Calculate The Turbidity Of The Wash Water.
2. The Turbidity Sensor Provides These Turbidity Measurements To The Washing Machine Or Dishwasher Controller, Which Determines The Of Each Wash Cycle. These Judgments Are Based A Comparison Of The Purified Water Measurement (Measured At The Beginning Of The Wash Cycle) And The Wash Water Measurement At The End Of The Wash.
3. By Measuring The Turbidity Of The Wash Water, The Washing Machine Can Only Wash Less Dirty Clothes For The Required, Thereby Saving And Allowing The End User To Save .
4. The Small Breakout Lm358 Is Used To Amplify The Analog Input Signal And Adjust The Onboard Trimmer Potentiometer For Amplification. Two Leds Board, Red Power Status, Green Digital Output Status Led (Not Very Bright)
5. Default Analog Value Output, The Jumper To Digital Output. Adjust The -Board Potentiometer To Change The Analog Threshold.

Sensor Default Output Analog Value:0-4.5V
Model:Water Detection Sensor Module
Note:Different Batches May Have Differences In Product Appearance, Color, And Printed Characters, Which Will Not Affect The Use
Colour:As Shown
Material:PCB+Plastic
Size:Cord Length:About 20cm

Package Contents:
1 * Turbid Water Detection Module
1 * Turbidity Sensor
1 * Wire