Type-C USB 5V 2A Boost Converter Step- Power Module Lithium Battery Charging Protection Board DIY Charger,with Welding
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 133,000 anmeldelser med vurderingen “Utmerket”
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (Gratis) | tor 10. - tir 15. sep
Solgt av: Kulemip
Returer: 30 dager
180 dagers betalingsbeskyttelse
Sammendrag
- When the load current is less than 50mA continuously, the output will be turned off.
- It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.
- When the battery voltage drops below 4.1V, the charging cycle starts again.
- When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
Type-C USB 5V 2A Boost Converter Step- Power Module Lithium Battery Charging Protection Board DIY Charger,with Welding Beskrivelse
When the load current is less than 50mA continuously, the output will be turned off.
It supports the external key, which is connected to the K point and the output negative pole. Short press to turn the power display and turn the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.
When the battery voltage drops below 4.1V, the charging cycle starts again.
When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
Type-C input, high accuracy of charging voltage.
It supports discharging while charging.
Note:power off operation is required to adjust the charging voltage setting
Input voltage range:5 - 5.5V
Charging cut-off voltage:(4.2v/4.35v) 0.5%
Charging current:2.4a 5%
Boost output voltage:5V - 5.15v ( loss compensation)
Boost output voltage ripple:100mV
Boost output current:2A
Boost conversion efficiency:92.5% (3.6V input, 5v2a output)
Static current at battery end:Less than 30uA
Version:With Welding
Colour:Black
Material:PCB+electronic components
Package Contents:
1 * 5V 2A Charge-discharge Integrated Module
Detaljer
| OPC | PVDT2NN |
|---|---|
| Merke | Wella Elements |
| Koder | 4712535186529 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 2cm |
|---|---|
| Width | 4cm |
| Length | 5cm |
| Weight | 0.0055kg |
| Colour | Black |
| Size | With Welding |
| Material | PCB+electronic components |
Sammenlign selgere for Type-C USB 5V 2A Boost Converter Step- Power Module Lithium Battery Charging Protection Board DIY Charger,with Welding
- Ny fra 81,36 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(141 anmeldelser) | - |
30 dager
Gratis retur Nei
|
81,36 kr
|
+Free Delivery
Estimert levering:
10-15 sep
|
81,36 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser