Type-C USB 5V 2A Boost Converter Step- Power Module Lithium Battery Charging Protection Board DIY Charger,with Welding
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 133,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (Zadarmo) | štv 10 - str 16 sep
Predáva: Kulemip
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Zhrnutie
- When the load current is less than 50mA continuously, the output will be turned off.
- It supports the external key, which is connected to the K point and the output negative pole. Short press to turn on the power display and turn on the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
- When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.
- When the battery voltage drops below 4.1V, the charging cycle starts again.
- When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
Type-C USB 5V 2A Boost Converter Step- Power Module Lithium Battery Charging Protection Board DIY Charger,with Welding Popis
When the load current is less than 50mA continuously, the output will be turned off.
It supports the external key, which is connected to the K point and the output negative pole. Short press to turn the power display and turn the 5V output. Two consecutive short presses will turn off the power display and turn off the 5V output.
When the charging current drops to 100mA after reaching the final floating charging voltage, the charging cycle will be automatically terminated.
When the battery voltage drops below 4.1V, the charging cycle starts again.
When the battery voltage is lower than 2.8V, the battery will be pre charged with a current of 180mA.
Type-C input, high accuracy of charging voltage.
It supports discharging while charging.
Note:power off operation is required to adjust the charging voltage setting
Input voltage range:5 - 5.5V
Charging cut-off voltage:(4.2v/4.35v) 0.5%
Charging current:2.4a 5%
Boost output voltage:5V - 5.15v ( loss compensation)
Boost output voltage ripple:100mV
Boost output current:2A
Boost conversion efficiency:92.5% (3.6V input, 5v2a output)
Static current at battery end:Less than 30uA
Version:With Welding
Colour:Black
Material:PCB+electronic components
Package Contents:
1 * 5V 2A Charge-discharge Integrated Module
Podrobnosti
| OPC | PVDT2NN |
|---|---|
| Značka | Wella Elements |
| Kódy | 4712535186529 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 2cm |
|---|---|
| Width | 4cm |
| Length | 5cm |
| Weight | 0.0055kg |
| Colour | Black |
| Size | With Welding |
| Material | PCB+electronic components |
Porovnajte predajcov pre Type-C USB 5V 2A Boost Converter Step- Power Module Lithium Battery Charging Protection Board DIY Charger,with Welding
- Nové od 12,73 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(141 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
12,73 €
|
+Free Delivery
Odhadované doručenie:
10-16 sep
|
12,73 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy