Produktbilder
V9 Emulator for J-LINK V9 Downloader for AMR MCU STM Development Board Burner
Merke Exogio
Ny
På lager
Derfor vil du elske å handle hos OnBuy:
- Tjen Cashback på hvert kjøp – bruk det umiddelbart på din neste bestilling
- Gratis levering – på millioner av varer på hele nettstedet
- Kunder elsker oss – 130,000 anmeldelser med vurderingen “Utmerket”
418,76 kr
569,68 kr
26 % rabatt!
GRATIS levering
1%
Tjen 4,19 kr med én gang
Les mer
Prisene for varer solgt av OnBuy inkluderer mva.
Rente- og gebyrfri delbetaling tilgjengelig
Se full produktbeskrivelse og detaljer
Levering: Standard (Gratis) | fre 14. - ons 19. aug
Returer: 30 dager
180 dagers betalingsbeskyttelse
Du vil kanskje også like
Beskrivelse og detaljer
Sammendrag
- 1. Speed Differences: The V8 supports up to 10Mb (JTAG debug mode) and 4Mb (SDW debug mode), while the V9 supports up to 20Mb (JTAG debug mode) and 15Mb (SDW debug mode).
- 2. Stability Differences: The V9's driver IC features voltage adaptation. When properly wired, it automatically adapts to the target board's CPU voltage. It can debug CPUs ranging from 1.8V to 5.5V, while the V8 can only debug 3.3V CPUs and has poor stability when debugging 5V CPUs.
- 3. V8s are prone to firmware failure and becoming bricked. I've had many V8s fail, and I've had to re-flash the firmware. For ordinary users, this is a near-perfect problem with the V9.
- 4. V8 no longer supports some CPUs, while the V9 supports almost all for ARM CPUs.
- for J-LINK V9 Downloader
V9 Emulator for J-LINK V9 Downloader for AMR MCU STM Development Board Burner Beskrivelse
1. Speed Differences: The V8 supports to 10Mb (JTAG debug mode) and 4Mb (SDW debug mode), while the V9 supports to 20Mb (JTAG debug mode) and 15Mb (SDW debug mode).
2. Stability Differences: The V9's driver IC features voltage adaptation. When properly wired, it automatically adapts to the target board's CPU voltage. It can debug CPUs ranging from 1.8V to 5.5V, while the V8 can only debug 3.3V CPUs and has poor stability when debugging 5V CPUs.
3. V8s are prone to firmware failure and becoming bricked. I've had many V8s fail, and I've had to re-flash the firmware. For ordinary users, this is a near-perfect problem with the V9.
4. V8 no longer supports some CPUs, while the V9 supports almost all for ARM CPUs.
key features: 1. The main control chip uses the STM32F205, ensuring firmware upgrades to version V9.4.
2. It provides 3.3V and 0.8A of current (pin 2) to the development board.
3. It supports standard JTAG and 2-wire SWD debug interfaces, with speeds reaching 20Mb/s (JTAG) and 15Mb/s (SWD).
4. It supports debugging of all for ARM chips, including MDK, IAR, and other standard JLink-supported compilation environments and IDEs.
5. Original firmware with fully automatic firmware upgrades.
Color: Black
Material: plastic
Package Contents:
1 * V9 emulator
1 * USB cable
1 * 20p cable
Detaljer
| OPC | PNRJ5DT |
|---|---|
| Merke | Exogio |
| Koder | 4712289204180 (EAN) |
| Produkt- og sikkerhetsinformasjon |
Produktdata
| Height | 5cm |
|---|---|
| Width | 7cm |
| Length | 10cm |
| Weight | 0.33kg |
| Colour | Black |
| Material | Plastic |
Sammenlign selgere for V9 Emulator for J-LINK V9 Downloader for AMR MCU STM Development Board Burner
- Ny fra 418,76 kr
| Selger | Vurderinger | Garanti | Returer | Pris | Levering | Totalt | Antall |
|---|---|---|---|---|---|---|---|
|
Sendt fra:
|
(115 anmeldelser) | - |
30 dager
Gratis retur Nei
|
418,76 kr
|
+Free Delivery
Estimert levering:
14-19 aug
|
418,76 kr
|
Tjen mens du handler med umiddelbar Cashback på alt.
Ingen binding, ingen kostnad
- Utbetalt til OnBuy-kontoen din
- Bruk det på neste kjøpet ditt
- Spar den eller ta den ut
Bli en Cashback VIP
Bare 1 kjøp gir deg større rabatter og bedre priser