Produktbilder
V9 Emulator for J-LINK V9 Downloader for AMR MCU STM Development Board Burner
Varumärke Exogio
Ny
I lager
Varför du kommer att älska att handla på OnBuy:
- Tjäna Cashback på varje köp – använd den hur du vill. Spara, spendera eller ta ut.
- Fri frakt – på miljontals produkter på sajten
- Kunder älskar oss – 130,000 recensioner med betyget “Utmärkt”
467,02 kr
658,70 kr
Spara 29%!
+47,00 kr frakt
1 %
Tjäna 4,67 kr direkt
Läs mer
Priserna för varor som säljs av OnBuy inkluderar moms.
Räntefria betalningsalternativ finns tillgängliga
Se fullständig produktbeskrivning och detaljer
Leverans: Standard (47,00 kr) | fre 14e - ons 19e aug
Returer: 30 dagar
180 dagars betalningsskydd
Du kanske också gillar
Beskrivning & information
Sammanfattning
- 1. Speed Differences: The V8 supports up to 10Mb (JTAG debug mode) and 4Mb (SDW debug mode), while the V9 supports up to 20Mb (JTAG debug mode) and 15Mb (SDW debug mode).
- 2. Stability Differences: The V9's driver IC features voltage adaptation. When properly wired, it automatically adapts to the target board's CPU voltage. It can debug CPUs ranging from 1.8V to 5.5V, while the V8 can only debug 3.3V CPUs and has poor stability when debugging 5V CPUs.
- 3. V8s are prone to firmware failure and becoming bricked. I've had many V8s fail, and I've had to re-flash the firmware. For ordinary users, this is a near-perfect problem with the V9.
- 4. V8 no longer supports some CPUs, while the V9 supports almost all for ARM CPUs.
- for J-LINK V9 Downloader
V9 Emulator for J-LINK V9 Downloader for AMR MCU STM Development Board Burner Beskrivning
1. Speed Differences: The V8 supports to 10Mb (JTAG debug mode) and 4Mb (SDW debug mode), while the V9 supports to 20Mb (JTAG debug mode) and 15Mb (SDW debug mode).
2. Stability Differences: The V9's driver IC features voltage adaptation. When properly wired, it automatically adapts to the target board's CPU voltage. It can debug CPUs ranging from 1.8V to 5.5V, while the V8 can only debug 3.3V CPUs and has poor stability when debugging 5V CPUs.
3. V8s are prone to firmware failure and becoming bricked. I've had many V8s fail, and I've had to re-flash the firmware. For ordinary users, this is a near-perfect problem with the V9.
4. V8 no longer supports some CPUs, while the V9 supports almost all for ARM CPUs.
key features: 1. The main control chip uses the STM32F205, ensuring firmware upgrades to version V9.4.
2. It provides 3.3V and 0.8A of current (pin 2) to the development board.
3. It supports standard JTAG and 2-wire SWD debug interfaces, with speeds reaching 20Mb/s (JTAG) and 15Mb/s (SWD).
4. It supports debugging of all for ARM chips, including MDK, IAR, and other standard JLink-supported compilation environments and IDEs.
5. Original firmware with fully automatic firmware upgrades.
Color: Black
Material: plastic
Package Contents:
1 * V9 emulator
1 * USB cable
1 * 20p cable
Detaljer
| OPC | PNRJ5DT |
|---|---|
| Varumärke | Exogio |
| Koder | 4712289204180 (EAN) |
| Produkt- och säkerhetsinformation |
Produktdata
| Height | 5cm |
|---|---|
| Width | 7cm |
| Length | 10cm |
| Weight | 0.33kg |
| Colour | Black |
| Material | Plastic |
Jämför säljare för V9 Emulator for J-LINK V9 Downloader for AMR MCU STM Development Board Burner
- Ny från 514,02 kr
| Säljare | Betyg | Garanti | Returer | Pris | Leverans | Totalt | Antal |
|---|---|---|---|---|---|---|---|
|
Skickas från:
|
(115 recensioner) | - |
30 dagar
Gratis returer Nej
|
467,02 kr
|
+47,00 kr Delivery
Beräknad leverans:
14-19 aug
|
514,02 kr
|
Tjäna medan du handlar med omedelbar Cashback på allt.
Inga krångel, ingen kostnad
- Betalas in på ditt OnBuy-konto
- Använd det vid ditt nästa köp
- Spara det eller ta ut det
Bli en Cashback VIP
Bara 1 köp låser upp bättre erbjudanden och priser