Wireless Wifi V2.0 Radio Telemetry Module with Antenna for MAVLink2 for Pixhawk Flight Controller FPV Smartphone

Wireless Wifi V2.0 Radio Telemetry Module with Antenna for MAVLink2 for Pixhawk Flight Controller FPV Smartphone Beskrivelse

WIFI V2.0 use 8bit CPU, only support UDP
WIFI V2.0 have external antenna (5DB)

HOW to use WIFI Module for PIXHAWK?
1. How to connect?
use 6P connects to for pixhawk flight controller.
Due to the different firmware, some firmware, two can be used, some firmware can only use one of the . So find one of the available for the connection.
IF you use PX4 firmware,only TELEM1 can be used ,can not use TELEM2.
For Ardupilot firmware, It is recommended to use the TELEM2 port. Or find one of the available for the connection.
For PX4 firmware , should use TELEM1 port.
2. How to use?
Please note: When using Wifi Radio Telemetry connection, it must use 3DR Power Module or 5V ESC to supply power to the flight control. USB cannot be inserted because USB priority is higher than Radio Telemetry. If USB cable is plugged in, it cannot be used for radio telemetry transmission.
Note:Due to different factory batches, any difference in module markings will not affect usage.
Type:For PIX
Colour:As Shown
Material:EVA

Package Contents:
1 * Wifi V2.0 Module