Zdjęcia produktu
For EMID & Card Dual Frequency Access Control Card Reader,Wiegand26/34,UART TTL RFID Card Reader, NFC Card Reader
Nowy
Dostępny
Dlaczego pokochasz zakupy na OnBuy:
- Zyskaj cashback przy każdym zakupie – wykorzystaj go od razu przy następnym zamówieniu
- Bezpłatna dostawa – przy milionach produktów w całym serwisie
- Klienci nas uwielbiają – 132,000 opinii z oceną “Doskonała”
86,58 zł
142,86 zł
Rabat 39%!
+19,06 zł dostawa
1%
Zdobądź 0,87 zł natychmiast
Dowiedz się więcej
Podane ceny zawierają podatek VAT (tam, gdzie ma to zastosowanie)
Dostępne opcje płatności bez odsetek
Zobacz pełny opis i szczegóły produktu
Dostawa: Standard (19,06 zł) | pt 4. - czw 10. wrz
Sprzedawca: GSbuy
Zwroty: 30 dni
Ochrona płatności przez 180 dni
To też może Ci się spodobać
Opis i specyfikacja
Podsumowanie
- Product Name: Dual-frequency access control reader; Operating Frequency: 125Khz , 13.56Mhz; Sensing distance: 0-15CM; Operating voltage: DC5-16V; Operating Current: Static Less than 30mA;Dynamic Less than 40mA; Communication format: Wiegand26/34, UART TTL; Working humidity: 10%~90%; Baud rate: 9600.N.8.1; Working temperature: -30℃~85℃; Ways of identifying: Swipe card
- Card reading types: IC card, supports S50, S70 and their compatible cards, M1 card, ID card, EM4100 card etc.(does not support HID, Cobra, APCiK, etc.)IC card, supports S50, S70 and their compatible cards, M1 card, ID card, EM4100 card etc.(does not support HID, Cobra, APCiK, etc.)
- Installation precautions: The line from the card reader to the controller: It is recommended to use an 8-core shielded multi-strand twisted pair network cable (two of which are spare, if the card reader light feedback legal card is not required, the LED cable can not be connected, if the buzzer of the card reader is not used) The Buzzer line can not be connected to the illegal card feedback from the device), and the data lines Data1 and Data0 are a pair of twisted pairs.
- UART TTL RFID Card Reader
- Doorbell NFC Card Reader
Opis produktu: For EMID & Card Dual Frequency Access Control Card Reader,Wiegand26/34,UART TTL RFID Card Reader, NFC Card Reader
Product Name: Dual-frequency access control reader; Operating Frequency: 125Khz , 13.56Mhz; Sensing distance: 0-15CM; Operating voltage: DC5-16V; Operating Current: Static Less than 30mA;Dynamic Less than 40mA; Communication format: Wiegand26/34, UART TTL; Working humidity: 10%~90%; Baud rate: 9600.N.8.1; Working temperature: -30~85; Ways of identifying: Swipe card
Card reading types: IC card, supports S50, S70 and their compatible cards, M1 card, ID card, EM4100 card etc.(does not support HID, , APCiK, etc.)IC card, supports S50, S70 and their compatible cards, M1 card, ID card, EM4100 card etc.(does not support HID, , APCiK, etc.)
Installation precautions: The from the card reader to the controller: It is recommended to use an 8-core shielded multi-strand twisted pair network cable (two of which are spare, if the card reader light feedback legal card is not required, the LED cable can not be connected, if the buzzer of the card reader is not used) The Buzzer can not be connected to the illegal card feedback from the device), and the data lines Data1 and Data0 are a pair of twisted pairs.
The wire diameter is recommended to be more than 0.3 square millimeters. The longest can not exceed 100 meters. The shield wire is connected to the GND of the controller.
The card reader is installed a metal surface. Since the card reader is a radio frequency product, the metal pair near the front or the rear will absorb its radio frequency signal. If the metal surface is large, it will even affect the card reader. card, or the reading distance is very attenuated.
The distance between the two card readers will also affect the card reader, some will shorten the card reading distance, and some will cause the two card readers to read the card at the same or the card reader cannot read the card.
Solution: Try not to insta
Specyfikacja
| OPC | PXQSDPN |
|---|---|
| Kody | 4713734240395 (EAN) |
| Informacje o produkcie i bezpieczeństwie |
Dane produktu
| Height | 2cm |
|---|---|
| Width | 5cm |
| Length | 5cm |
| Weight | 0.0225kg |
| Colour | As Shown |
| Material | Plastic |
Porównaj sprzedawców dla: For EMID & Card Dual Frequency Access Control Card Reader,Wiegand26/34,UART TTL RFID Card Reader, NFC Card Reader
- Nowy od 105,64 zł
| Sprzedawca | Oceny | Gwarancja | Zwroty | Cena | Dostawa | Łącznie | Sztuk |
|---|---|---|---|---|---|---|---|
|
Wysyłka z:
|
[2,4] (192 opinie) | - |
30 dni
Darmowe zwroty Nie
|
86,58 zł
|
+19,06 zł Delivery
Przewidywana dostawa:
4-10 wrz
|
105,64 zł
|
Zyskuj na zakupach dzięki natychmiastowemu Cashbackowina wszystko.
Bez ukrytych kosztów
- Środki przekazane na konto OnBuy
- Wykorzystaj przy kolejnym zakupie
- Oszczędzaj lub wypłacaj
Zostań Cashback VIP
Tylko 1 zakup odblokowuje lepsze oferty i wyższy zwrot