Sorry, this item is temporarily out of stock.

SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for Raspberry Pi

Name: SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for Raspberry Pi
Brand: Typecat
SKU: PWKSC7M
Availability: OutOfStock

Brand Typecat

New

Podobne produkty, które mogą Cię zainteresować

Grille komputerowe

Would you like us to let you know when it's back?

Dodaj do koszyka

Opis i specyfikacja

Podsumowanie

The microphone is a single mono element. You can select whether you want it to be on the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick up two microphones!
You can set them up to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it up! This microphone is best used with Cortex M-series chips like the for Arduino Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Microphone Module

Opis produktu: SPH0645 I2S MEMS Microphone Breakout Sensor Board Module SPH0645LM4H Microphone Module 1.6-3.6V for Raspberry Pi

The microphone is a single mono element. You can select whether you want it to be the Left or Right channel by connecting the Select pin to power or ground. If you need stereo, pick two microphones!
You can set them to be stereo by sharing the Clock, WS and Data lines but having one with Select to ground, and one with Select to high voltage.
This I2S MEMS microphone is bottom ported, so make sure you have the hole in the bottom facing out towards the sounds you want to read. It's a 1.6-3.6V max device only, so not for use with 5V logic (its really unlikely you'd have a 5V-logic device with I2S anyways).
Many beginner microcontroller boards don't have I2S, so make sure its a supported interface before you try to wire it ! This microphone is best used with Cortex M-series chips like the for Zero, for Feather M0, or single-board computers like the for Raspberry Pi.
Color:
Material: Plastic+Metal

Package Contents:
1*Microphone Module

Specyfikacja