Zdjęcia produktu
X1008 PCIe to 2.5 Inch HDD / SSD + 3.5 Inch HDD Shield for Raspberry Pi 5
Marka Saudism
Nowy
Dostępny
Dlaczego pokochasz zakupy na OnBuy:
- Zyskaj cashback przy każdym zakupie – wykorzystaj go od razu przy następnym zamówieniu
- Bezpłatna dostawa – przy milionach produktów w całym serwisie
- Klienci nas uwielbiają – 137,000 opinii z oceną “Doskonała”
318,87 zł
424,06 zł
Rabat 25%!
+4,00 zł dostawa
1%
Zdobądź 3,19 zł natychmiast
Dowiedz się więcej
Podane ceny zawierają podatek VAT (tam, gdzie ma to zastosowanie)
Dostępne opcje płatności bez odsetek
Zobacz pełny opis i szczegóły produktu
Dostawa: Standard (4,00 zł) | wt 10. - pt 13. lis
Zwroty: 30 dni
Ochrona płatności przez 180 dni
To też może Ci się spodobać
Opis i specyfikacja
Podsumowanie
- X1008 PCIe to 2 ports SATA HDD expansion board, designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. This board facilitates the simultaneous connection of a 3.5-inch HDD and a 2.5-inch HDD/SSD, unleashing the full potential of your storage capabilities, with SATA 3.0 interface speeds reaching up to 5Gbps.
- With support for 12V input via a standard DC jack and equipped with high-efficiency DC/DC step-down converters, the X1008 efficiently powers both your Raspberry Pi5 and HDDs from a single power source, simplifying your setup.
- The X1008 serves as the perfect storage solution for establishing a home media center or constructing a network-attached storage (NAS) system. It empowers you to store and stream your personal collection of videos, music, and digital photos within the confines of your home or remotely from anywhere around the globe. Important Notes: The X1008 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
- Don't power the X1008 and the Raspberry Pi5 at the same time. Older SATA drives with less efficient flash media may not perform as well as newer drives. New SATA HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer. Compatible With for Raspberry Pi 5B. Supports the connection of a 3.5-inch SATA HDD and a 2.5-inch HDD/SSD to your Raspberry Pi 5 simultaneously
- Compliant with the Serial ATA 3.0 specification, with backward compatibility to SATA 2.0 and SATA 1.0. Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0. Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s. Compatible with SATA 6G, 3G, and 1.5G hard drives. Features plug-and-play installation for ease of setup. LED indicators display power and drive status
Opis produktu: X1008 PCIe to 2.5 Inch HDD / SSD + 3.5 Inch HDD Shield for Raspberry Pi 5
X1008 PCIe to 2 HDD expansion board, designed to provide a mass-capacity storage and high-speed storage solution for your Raspberry Pi 5. This board facilitates the simultaneous connection of a 3.5-inch HDD and a 2.5-inch HDD/SSD, unleashing the full potential of your storage capabilities, with 3.0 interface speeds reaching to 5Gbps.
With support for 12V input via a standard jack and equipped with high-efficiency / step-down converters, the X1008 efficiently powers both your Raspberry Pi5 and HDDs from a single power source, simplifying your setup.
The X1008 serves as the perfect storage solution for establishing a home media center or constructing a network-attached storage (NAS) system. It empowers you to store and stream your personal collection of videos, music, and digital photos within the confines of your home or remotely from anywhere around the globe. Important Notes: The X1008 is designed for data storage purposes and does not currently support booting from HDD/SSD with the existing firmware.
Don't power the X1008 and the Raspberry Pi5 at the same . Older drives with less efficient flash media may not perform as well as newer drives. New HDDs/SSDs are not partitioned and will need to be both partitioned and formatted when first connected to the Raspberry Pi before they will be accessed in the Explorer. Compatible With for Raspberry Pi 5B. Supports the connection of a 3.5-inch HDD and a 2.5-inch HDD/SSD to your Raspberry Pi 5 simultaneously
Compliant with the Serial ATA 3.0 specification, with backward compatibility to 2.0 and 1.0. Adheres to the PCI-Express v2.0 specification and is backward compatible with PCI-Express v1.0. Supports communication speeds of 5.0 Gbit/s, 3.0 Gbit/s, and 1.5 Gbit/s. Compatible with 6G, 3G, and 1.5G hard drives. Features plug-and- installation fo
Specyfikacja
| OPC | PY8Q6NK |
|---|---|
| Marka | Saudism |
| Kody | 4713781282614 (EAN) |
| Informacje o produkcie i bezpieczeństwie |
Dane produktu
| Height | 3cm |
|---|---|
| Width | 13cm |
| Length | 18cm |
| Weight | 0.167kg |
| Colour | Black |
| Material | Electronic Component |
Porównaj sprzedawców dla: X1008 PCIe to 2.5 Inch HDD / SSD + 3.5 Inch HDD Shield for Raspberry Pi 5
- Nowy od 322,87 zł
| Sprzedawca | Oceny | Gwarancja | Zwroty | Cena | Dostawa | Łącznie | Sztuk |
|---|---|---|---|---|---|---|---|
|
Wysyłka z:
|
[5,*] (647 opinii) | - |
30 dni
Darmowe zwroty Nie
|
318,87 zł
|
+4,00 zł Delivery
Przewidywana dostawa:
10-13 lis
|
322,87 zł
|
Zyskuj na zakupach dzięki natychmiastowemu Cashbackowina wszystko.
Bez ukrytych kosztów
- Środki przekazane na konto OnBuy
- Wykorzystaj przy kolejnym zakupie
- Oszczędzaj lub wypłacaj
Zostań Cashback VIP
Tylko 1 zakup odblokowuje lepsze oferty i wyższy zwrot