Imagini produs
CT-20C Multi-Function Audio Cable Tester 16-in-1 Special Electronic Cable Tester -Compatible XLR Signal
Brand ISTOVO
Nou
În stoc
De ce îți va plăcea să cumperi de la OnBuy:
- Câștigi Cashback la fiecare achiziție – folosește-l la următoarea comandă
- Livrare gratuită – la milioane de produse de pe site
- Clienții ne iubesc – 126,000 de recenzii cu evaluare “Excelent”
464,17 RON
587,56 RON
Reducere de 21%!
Livrare GRATUITĂ
1%
Câștigați 4,64 RON instant
Află mai multe
Prețurile articolelor vândute de OnBuy includ TVA.
Opțiuni de plată în rate fără dobândă disponibile
Vezi descrierea completă și detaliile produsului
Livrare: Standard (Gratuit) | mar 23 - sâm 27 iun.
Returnări: 30 zile
Protecție la plată pentru 180 de zile
Cele mai populare în Amplificatoare auto
Descriere & Detalii
Rezumat
- Cable Testing: 1. At first, turn the rotary switch fully clockwise to test the battery strength. The battery LED will light bright green if the internal battery is fully charged.
- 2. Then plug one end of the cable into the appropriate jack on the left side panel of the cable tester, Plug the other end of the cable into the appropriate jack on the right side panel. Set the rotary switch to "1" to test the connection of contact 1 on the plug inserted into the left side panel.
- 3. lf there is a connection, the Green LED will light below "1" and a Yellow LED will light above each contact on the right side plug connected to "1" on the left side plug. Use the charts below to verify proper cable connections.
- 4. If no LED lights than there is no connection and the left side contact "1"is "floating" due to design or an "open" in the cable. Set the rotary switch to "2" to test contact 2, and so on, until all contact shave been checked.
- 5. If the Ground LED lights than there is a connection between the corresponding contacts and the chassis. To test the cable with a banana plug, just plug each end of the cable into the banana jacks. The LED will light and the unit will beep a tone if there is a connection between the plugs. These banana jacks can also be used for continuity tests using two probe leads.
Descriere CT-20C Multi-Function Audio Cable Tester 16-in-1 Special Electronic Cable Tester -Compatible XLR Signal
Cable Testing: 1. At first, turn the rotary fully clockwise to test the battery strength. The battery LED will light bright green if the internal battery is fully charged.
2. Then plug one end of the cable into the appropriate jack the left side panel of the cable tester, Plug the other end of the cable into the appropriate jack the right side panel. Set the rotary to "1" to test the connection of contact 1 the plug inserted into the left side panel.
3. lf there is a connection, the Green LED will light below "1" and a Yellow LED will light above each contact the right side plug connected to "1" the left side plug. Use the charts below to verify proper cable connections.
4. If no LED lights than there is no connection and the left side contact "1"is "floating" due to design or an "open" in the cable. Set the rotary to "2" to test contact 2, and so , until all contact shave been checked.
5. If the Ground LED lights than there is a connection between the corresponding contacts and the chassis. To test the cable with a banana plug, just plug each end of the cable into the banana jacks. The LED will light and the unit will beep a tone if there is a connection between the plugs. These banana jacks can also be used for continuity tests using two probe leads.
CT-20C Cable Tester.
16-in-1 cables checker, 10-way Wire Tracker with LED Indicators. Can test cables with Type-C, USB, HDTV, DIN, RCA, RJ45, 6.35JACK, 3.5JACK, XLR, Speakon...
Color: As Shown
Material: Metal
Package Contents:
1 * CT-20C cable tester (without 1 x 9V battery)
Detalii
| OPC | PPZHKSM |
|---|---|
| Brand | ISTOVO |
| Coduri | 6031773420447 (EAN) |
Date despre produs
| Height | 7cm |
|---|---|
| Width | 12cm |
| Length | 20cm |
| Weight | 0.834kg |
| Colour | As Shown |
| Material | Metal |
Compară vânzătorii pentru CT-20C Multi-Function Audio Cable Tester 16-in-1 Special Electronic Cable Tester -Compatible XLR Signal
- Nou de la 464,17 RON
| Vânzător | Note | Garanție | Retururi | Preț | Livrare | Total | Cantitate |
|---|---|---|---|---|---|---|---|
|
Expediat din:
|
(67 recenzii) | - |
30 zile
Retur gratuit Nu
|
464,17 RON
|
+Free Delivery
Livrare estimată:
23-27 iun.
|
464,17 RON
|
Câștigați în timp ce cumpărați cu Cashback instant la orice produs.
Fără condiții ascunse, fără costuri
- Plătit în contul dumneavoastră OnBuy
- Folosiți-i pentru următoarea achiziție
- Economisiți-l sau retrageți-l
Deveniți un Cashback VIP
O singură achiziție deblochează oferte și rate mai avantajoase