Ne pare rău, acest articol este temporar indisponibil.

SW3518 100W Full Protocol High-Power Fast Charge Module Voltage Current Fast Charge Protocol Display Module QC4.0 PD3.0

Name: SW3518 100W Full Protocol High-Power Fast Charge Module Voltage Current Fast Charge Protocol Display Module QC4.0 PD3.0
Brand: Tlily
SKU: PYSS8TZ
Availability: OutOfStock

Brand Tlily

Nou

Produse similare care te-ar putea interesa

Echipamente electrice și de testare

Dental Scaler Valve Water Supply Solenoid Universal for Ultrasonic Cleaner 30V Electromagnetic Valve Replacement111,13 RONLivrare GRATUITĂ

Set suporturi perii de carbon compatibile cu Makita 638921-2 CB430 BGA450 BGA452 DGA452 BGD800--69,99 RONLivrare GRATUITĂ

Unit of Cold Spark Firework Heater Part, Heating Coil-Element for Special Occasion Flame Sprays101,57 RONLivrare GRATUITĂ

Electromagnet solenoid pentru automatizare industrială, electromagnet cu mișcare liniară cu cadru deschis, tip tracțiune și împingere, cu175,14 RONLivrare GRATUITĂ

Senzor de curent alternativ pentru sisteme de control automat, traductor de curent de înaltă precizie și izolație ridicată, convertor183,99 RONLivrare GRATUITĂ

2 buc. voltmetru digital cu șină DIN de 35 mm, tester de tensiune67,99 RONLivrare GRATUITĂ

Set suporturi perii de carbon compatibile cu Makita 638921-2 CB430 BGA450 BGA452 DGA452 BGD800--69,99 RONLivrare GRATUITĂ

Dental Scaler Valve Water Supply Solenoid Universal for Ultrasonic Cleaner 30V Electromagnetic Valve Replacement111,13 RONLivrare GRATUITĂ

Ai vrea să te anunțăm când revine?

Adaugă în coș

Descriere & Detalii

Rezumat

1. Max 100W output power, support PPS/PD/QC/AFC/FCP/SCP/SFCP/VOOC and other fast charging protocols
2. Support the fast charge output of port A or C port, only support the pressure reduction
3. Input voltage 6 ~ 32V, it is recommended to use 24V power supply to achieve 20V output
4. Support the extension display or multiple power board superposition
voltage current display module

Descriere SW3518 100W Full Protocol High-Power Fast Charge Module Voltage Current Fast Charge Protocol Display Module QC4.0 PD3.0

1. Max 100W output power, support PPS/PD/QC/AFC/FCP/SCP/SFCP/VOOC and other fast charging protocols
2. Support the fast charge output of port A or C port, only support the pressure reduction
3. Input voltage 6 ~ 32V, it is recommended to use 24V power supply to achieve 20V output
4. Support the extension display or multiple power board superposition

Instructions Compatible?with use:
Power supply through 5.5x2.1mm power sockets, or to connect to the power supply by yourself. power supply
The voltage range is 6 ~ 32V.
Because it is a lower voltage power supply, the input voltage must be greater than the output voltage. If you want to output 20V
It is recommended to enter 24V.
After inserting the power supply, the red indicator lights , and the USB A port will have 5V power output.
If you insert a device with fast charge, such as mobile phones, power seductors, etc., the indicator lights are
Starting, it means entering the fast charge mode. Output voltage current is adjusted by equipment such as mobile phones or seductors
Festival.
If there is a fast charge display board, you can know the charging voltage and charging current through the screen
Charging protocols, input voltage and other parameters. Through the the side, 3 display methods can be changed.
Colour:
Material:PCB

Package Contents:
1 x Full protocol high -power fast charge module