0.91inch OLED 128x32 I2C IIC SSD1306 OLED Display Module for RPI Raspberry Pi 1, B+, 2, 3 and Zero
Na sklade
Prečo si zamilujete nakupovanie na OnBuy:
- Získajte cashback pri každom nákupe – použite ho okamžite na ďalšiu objednávku
- Doprava zadarmo – na milióny produktov na celej stránke
- Zákazníci nás milujú – 130,000 hodnotení s “Vynikajúcim” hodnotením
Ceny produktov predávaných spoločnosťou OnBuy sú uvedené s DPH.
K dispozícii sú aj bezúročné možnosti platby
Zobraziť celý popis a podrobnosti o produkte
Doručenie: Štandard (4,04 €) | str 12 - pon 17 aug
Vrátenie tovaru: 30 dní
180-dňová ochrana platieb
Mohlo by sa vám tiež páčiť
Zhrnutie
- This mini OLED is designed for Raspberry Pi, it can work with Pi 1, B +, Pi 2, Pi 3 and Pi Zero.
- The PiOLED comes with a monochrome 128x32 OLED, with blue pixels. The OLED screen uses only the I2C pins so you have plenty of GPIO connections available for LED sensor buttons, etc. It is also nice and compact so that it fits in any case
- These screens are small, only 1Inch diagonal, but very legible due to the high contrast of an OLED screen
- This screen is made of 128x32 single OLED blue pixels, no backlighting is required
- Using the screen is very easy, our Python library will guide you to draw images, text, make animations or simple video
0.91inch OLED 128x32 I2C IIC SSD1306 OLED Display Module for RPI Raspberry Pi 1, B+, 2, 3 and Zero Popis
This OLED is designed for Raspberry Pi, it can work with Pi 1, B +, Pi 2, Pi 3 and Pi Zero.
The PiOLED comes with a monochrome 128x32 OLED, with pixels. The OLED screen uses only the I2C pins so you have plenty of GPIO connections available for LED sensor buttons, etc. It is also nice and compact so that it fits in any case
These screens are small, only 1Inch diagonal, but very legible due to the high contrast of an OLED screen
This screen is made of 128x32 single OLED pixels, no backlighting is required
Using the screen is very easy, our Python library will guide you to draw images, text, make animations or simple video
It comes completely pre-assembled and tested so you do not need to do anything else than plug it in and install our Python code.
Characteristic:
6 pin header
Voltage: 3.3 v
Use 2 GPIO pins
Interface: CII
0x3c: SSD1306
Note:
only screen module, without for Raspberry Pi board.
the printed characters are slightly different, which does not affect the use.
Colour:
Material:Metal+Plastic
Package Contents:
1 * Module
Podrobnosti
| OPC | PVXZSKK |
|---|---|
| Značka | Exogio |
| Kódy | 4714174497905 (EAN) |
| Informácie o produkte a bezpečnosti |
Údaje o produkte
| Height | 3cm |
|---|---|
| Width | 3cm |
| Length | 5cm |
| Weight | 0.0075kg |
| Colour | Blue |
| Material | Metal+Plastic |
Porovnajte predajcov pre 0.91inch OLED 128x32 I2C IIC SSD1306 OLED Display Module for RPI Raspberry Pi 1, B+, 2, 3 and Zero
- Nové od 20,03 €
| Predajca | Recenzie | Záruka | Vrátenie tovaru | Cena | Doručenie | Celkom | Množstvo |
|---|---|---|---|---|---|---|---|
|
Odoslané z:
|
(115 recenzií) | - |
30 dní
Bezplatné vrátenie tovaru Nie
|
15,99 €
|
+4,04 € Delivery
Odhadované doručenie:
12-17 aug
|
20,03 €
|
Zarábajte pri nakupovaní s okamžitým Cashback na všetko.
Žiadny háčik, žiadne náklady
- Pripísané na váš OnBuy účet
- Použite ho na váš ďalší nákup
- Ušetrite alebo si vyberajte
Staňte sa Cashback VIP
Už 1 nákup odomkne lepšie ponuky a zľavy